[PATCH 6/6] ARM: dts: broadcom: Use noncoherent SATA DMA on BCM958625HR

[Florian Fainelli]

The AHCI controller on BCM958625HR fails with the dma-coherent property
inherited from bcm-nsp.dtsi. Soft reset times out waiting for the first
FIS command, subsequent engine resets fail, and the disk is not detected.

AHCI allocates its command tables and received-FIS buffers with the DMA
API. Declaring the controller coherent bypasses the cache handling that
these buffers require on this board. Removing the property restores
hard disk detection and operation, as confirmed with a diagnostic DTB
that changed only this property.

Use noncoherent DMA for SATA on BCM958625HR, matching the downstream SDK.

Fixes: 56e2ff0346a3 ("ARM: dts: NSP: Add dma-coherent to relevant DT entries")
Signed-off-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/broadcom/bcm958625hr.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/broadcom/bcm958625hr.dts b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
index 3e86f3c2593a..f6717ca76aef 100644
--- a/arch/arm/boot/dts/broadcom/bcm958625hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
@@ -183,6 +183,7 @@ partition@700000 {
 };
 
 &sata {
+	/delete-property/ dma-coherent;
 	status = "okay";
 };
 
-- 
2.53.0