Re: [PATCH 1/2] ARM: dts: imx6ull-dhcor-maveo-box: Remove unused SPI device

[Marek Vasut]

On 10/21/26 3:44 PM, Christoph Niedermaier wrote:
> On the maveo box, the SPI pins are connected to connector X10,
> but no device is connected. The device "dhcom-board" was used
> only to test the hardware, but was not removed afterward. So
> remove this device to accurately represent the current hardware
> configuration here.
>
> Fixes: 145e2732a5e9 ("ARM: dts: imx6ull-dhcor: Add Marantec maveo box")
> Signed-off-by: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx>
> ---
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
> Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
> Cc: Frank Li <Frank.Li@xxxxxxx>
> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
> Cc: Fabio Estevam <festevam@xxxxxxxxx>
> Cc: Marek Vasut <marex@xxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: imx@xxxxxxxxxxxxxxx
> Cc: kernel@xxxxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> ---
>   arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts | 8 --------
>   1 file changed, 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
> index 047f7b2d8526..eb0b91040110 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
> @@ -60,14 +60,6 @@ &ecspi4 {
>   	pinctrl-0 = <&pinctrl_ecspi4>;
>   	pinctrl-names = "default";
>   	status = "okay";

Drop "status = "okay"" too , since this controller will be unused ?

[...]