Re: [PATCH 1/5] gpiolib: fix GPIO descriptor leak in gpiod_get_array()

[Andy Shevchenko]

On Wed, Oct 21, 2026 at 12:02:06PM -0700, Dmitry Torokhov wrote:
> In gpiod_get_array(), descs->ndescs is used as the loop induction
> variable and is only incremented at the end of each iteration. When
> krealloc() fails on the first iteration (when index is 0), descs->desc[0]
> has already been acquired via gpiod_get_index(), but descs->ndescs is
> still 0. Consequently, gpiod_put_array() frees descs without releasing
> descs->desc[0], leaking the descriptor.
> 
> Fix this by using a dedicated loop induction variable and incrementing
> descs->ndescs immediately upon storing the retrieved descriptor.
> Additionally, since the fast-path array_info setup only executes for
> the first element (index 0), simplify the bitmap_set() calls to start at
> bit 0 for count bits instead of calculating offsets from the loop index.

Can you start doing cover letters, please? The problem is if I want to give a
tag for the entire series I will need to iterate over all patches, while `b4`
has facility to do it for me. Also with --base it would be easier to see which
base you have used for the series.

-- 
With Best Regards,
Andy Shevchenko