Re: [PATCH v1 0/2] ARM: dts: imx: enable SPI on Apalis iMX6 and Colibri iMX7

[Frank . Li]

From: Frank Li <Frank.Li@xxxxxxx>


On Thu, 01 Oct 2026 17:53:57 +0200, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
>
> The SPI controllers of the Apalis iMX6 and Colibri iMX6ULL modules are
> disabled in the module device tree and no carrier board enabled them.
>
> A device can be instantiated from user space through the spi_master
> new_device sysfs interface, so enable the controllers on the carrier
> boards where the signals reach a user accessible connector.
> The Colibri iMX6 and iMX7 carrier boards and the Apalis iMX8 ones
> already do this.
>
> [...]

Applied to imx/dt-intend (will appear to linux-next after v7.4-rc1),
thanks!

[1/2] ARM: dts: imx6q-apalis: enable SPI1 and SPI2
      commit: 119f908dae670028f5198e3b662489297393851e
[2/2] ARM: dts: imx6ull-colibri-iris: enable SPI
      commit: 180afbab4babacbc4d9f6100722170470a0ff9ee

Best regards,
--
Frank Li <Frank.Li@xxxxxxx>