[PATCH v3 03/16] dt-bindings: remoteproc: k3-dsp: Allow referencing the timers' power domains

[Tomeu Vizoso]

A firmware may drive the core's timers, which need their power domains
held; the remoteproc driver does not hold them, so let the DSP node
reference them for a driver that attaches to the running core to hold.

Assisted-by: LLM
Signed-off-by: Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx>

---

v3:
- Initial version
---
 .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
index d6319c8e96f8..80eaef0a19b8 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -76,6 +76,23 @@ properties:
 # Optional properties:
 # --------------------
 
+  power-domains:
+    description: |
+      Power domains of the SoC timers the running firmware ticks on and
+      times its work out with. The firmware programs these timers itself
+      and makes no power request for them, and the timers' own nodes are
+      reserved for it, so nothing else requests their power; a client
+      driver of the firmware holds them on while it drives the processor.
+      The processor's own power is managed through ti,sci-dev-id, not here.
+    items:
+      - description: power domain of the first timer
+      - description: power domain of the second timer
+
+  power-domain-names:
+    items:
+      - const: timer1
+      - const: timer2
+
   sram:
     minItems: 1
     maxItems: 4

-- 
2.54.0