[PATCH v1 5/5] arm64: dts: cix: Add the Sky1 AUDSS DMA-350 integration

[Jelly Jia]

The AUDSS DMA-350 master sees the CPU physical peripheral window at
0x07010000 through DMA address 0x20000000, and DRAM at CPU physical
0xc0000000 through DMA address 0x30000000. Describe the 1 MiB peripheral
window and 512 MiB DRAM window with dma-ranges on the parent bus, and add
the controller's clock and reset.

Route the eight channel interrupts through the AUDSS CRU, whose AP gates
combine them onto GIC SPI 230. List child interrupts in hardware channel
order and set dma-channel-mask to 0xff to make all eight channels
available to Linux.

Signed-off-by: Jelly Jia <Jelly.Jia@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/cix/sky1.dtsi | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index cd498ee7e9a7..6ca94f606463 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -588,17 +588,41 @@ mbox_pm2ap: mailbox@65a0080 {
 			cix,mbox-dir = "rx";
 		};
 
+		audss-dma-bus {
+			compatible = "simple-bus";
+			ranges;
+			#address-cells = <2>;
+			dma-ranges = <0x0 0x20000000 0x0 0x07010000 0x0 0x00100000>,
+				     <0x0 0x30000000 0x0 0xc0000000 0x0 0x20000000>;
+			#size-cells = <2>;
+
+			audss_dmac: dma-controller@7010000 {
+				compatible = "arm,dma-350";
+				reg = <0x0 0x07010000 0x0 0x10000>;
+				clocks = <&audss_cru CLK_DMAC_AXI>;
+				#dma-cells = <1>;
+				dma-channel-mask = <0xff>;
+				interrupt-parent = <&audss_cru>;
+				interrupts = <0>, <1>, <2>, <3>,
+					     <4>, <5>, <6>, <7>;
+				resets = <&audss_cru AUDSS_DMAC_SW_RST>;
+			};
+		};
+
 		audss_cru: clock-controller@7110000 {
 			compatible = "cix,sky1-audss-cru";
 			reg = <0x0 0x07110000 0x0 0x10000>;
 			#clock-cells = <1>;
-			#reset-cells = <1>;
 			clocks = <&scmi_clk CLK_TREE_AUDIO_CLK0>,
 				 <&scmi_clk CLK_TREE_AUDIO_CLK2>,
 				 <&scmi_clk CLK_TREE_AUDIO_CLK4>,
 				 <&scmi_clk CLK_TREE_AUDIO_CLK5>;
 			clock-names = "x8k", "x11k", "sys", "48m";
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&smc_devpd SKY1_PD_AUDIO>;
+			#reset-cells = <1>;
 			resets = <&s5_syscon SKY1_AUDIO_HIFI5_NOC_RESET_N>;
 		};
 
-- 
2.54.0