[PATCH] phy: ingenic: Don't disable the supply in exit

[Olivier Louvignes]

The supply is enabled in power_on() and disabled in power_off(); exit()
disabling it again unbalances it. dwc2 powers its PHY off before exiting
it, which warns at every probe on an Ingenic X1600:

  WARNING: ... _regulator_disable
  ...
  ingenic_usb_phy_exit
  phy_exit
  dwc2_lowlevel_hw_disable
  dwc2_driver_probe

Fixes: 31de313dfdcf ("PHY: Ingenic: Add USB PHY driver using generic PHY framework.")
Signed-off-by: Olivier Louvignes <olivier@xxxxxxxxx>
---
Tested on v7.3 on a HiBy R1 (X1600), whose PHY supply is a dummy
regulator: without this the warning above came at every probe, with it
there is none and USB still enumerates at high speed. Build-tested with
W=1 on phy next.

 drivers/phy/ingenic/phy-ingenic-usb.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/phy/ingenic/phy-ingenic-usb.c b/drivers/phy/ingenic/phy-ingenic-usb.c
index 7e62d46850fd..d8e5ef302b74 100644
--- a/drivers/phy/ingenic/phy-ingenic-usb.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -124,7 +124,6 @@ static int ingenic_usb_phy_exit(struct phy *phy)
 	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
 
 	clk_disable_unprepare(priv->clk);
-	regulator_disable(priv->vcc_supply);
 
 	return 0;
 }

base-commit: 8f56fdf3d8cb9f1dbdc93bf9ac816698aa6f70b7
-- 
2.39.5