Re: [PATCH v4 3/4] hwmon: (pmbus_core) Support relative encoding of vout related commands

[Guenter Roeck]

On Tue, Oct 20, 2026 at 08:02:07PM -0700, Abdurrahman Hussain wrote:
> From: Lars Petter Mostad <lars.petter.mostad@xxxxxxxxxx>
> 
> PMBus 1.3 allows for relative encoding of voltages in certain output
> voltage related commands. These commands are encoded relative to
> VOUT_COMMAND. Support this when encoding/decoding commands.
> 
> Signed-off-by: Lars Petter Mostad <lars.petter.mostad@xxxxxxxxxx>
> [abdurrahman: rebased; check VOUT_MODE for 0xff before testing the
>  relative bit; use signed division and clamp the user value before
>  scaling; reject a VOUT_COMMAND that decodes to 0 or less, or above
>  INT_MAX mV, at probe and from the regulator, and scale the relative
>  limits by it without overflowing s64; update the cached VOUT_COMMAND
>  only after a successful write; decode the regulator margins with the
>  register they were read from, and in relative mode bound the output
>  voltage only by MFR_VOUT_MIN/MAX, since VOUT_MARGIN_LOW/HIGH move with
>  VOUT_COMMAND]
> Signed-off-by: Abdurrahman Hussain <abdurrahman@xxxxxxxxxx>

Applied.

Thanks,
Guenter