Re: [PATCH v3 0/2] riscv: dts: spacemit: mark K1 boot nodes bootph-pre-ram

[Hung-Chun Tseng]

Hi E,

On 10/24/26 07:45, E Shattow wrote:
> Split the patches in this series so we have a clearly defined initial
> changeset that does "Extend the BootROM configured peripherals to device
> tree bootph-pre-ram hints for any SPL loaded by that BootROM in SD,
> eMMC, and SPI NOR boot modes".

Thanks, that makes sense. For v4 I plan this split:

1. BootROM: the fixed clocks, the clock and reset controllers, uart0,
   sdhci0, emmc and qspi in k1.dtsi, and the SPI NOR flash@0 in the
   board files.

2. DRAM setup, as an add-on for Yixun to take or leave: i2c2 and i2c8
   in k1.dtsi, and the EEPROM, the PMIC and its buck1, buck3 and aldo1
   in the board files.

> Capture all the BootROM SPL loader flows
> that we can understand (USB missing currently? please add this)

USB download mode goes through the OTG port (FDL button, then
"fastboot stage"), but mainline has no node for the USB2 OTG
controller behind it yet. The DWC3 is a different controller. So there
is nothing to tag for USB today, and I'd add it once that node lands.

Yixun, could you confirm that the BootROM uses that OTG controller for
USB download, and that it does not touch the DWC3?

Does this split look right to you? I'll send v4 after the merge window.

Thanks,
Hung-Chun