[PATCH] rpmsg: char: take ept_lock in the SET_INCOMING_FLOWCONTROL ioctl
From: Yu Zhang
Date: Mon Oct 26 2026 - 06:06:38 EST
rpmsg_eptdev_ioctl() handles RPMSG_SET_INCOMING_FLOWCONTROL by calling
rpmsg_set_flow_control(eptdev->ept, ...) without holding eptdev->ept_lock
and without checking eptdev->ept for NULL. rpmsg_set_flow_control()
dereferences ept->ops, so this is the only eptdev->ept user that does not
honour the ept_lock discipline.
eptdev->ept is torn down under ept_lock: rpmsg_chrdev_eptdev_destroy()
(reached via RPMSG_DESTROY_EPT_IOCTL on a second fd, or when the rpmsg
device is removed) and rpmsg_eptdev_release() both do
mutex_lock(&eptdev->ept_lock);
rpmsg_destroy_ept(eptdev->ept);
eptdev->ept = NULL;
mutex_unlock(&eptdev->ept_lock);
and rpmsg_destroy_ept() drops the endpoint's last reference and frees it.
A SET_INCOMING_FLOWCONTROL ioctl running concurrently can therefore read
eptdev->ept just as it is freed and dereference ept->ops -> use-after-free
(or a NULL dereference once ept has been cleared).
The other eptdev->ept users get this right: rpmsg_eptdev_write_iter() and
rpmsg_eptdev_poll() take ept_lock and re-check eptdev->ept before use. Do
the same in the ioctl. Lock only this case: RPMSG_DESTROY_EPT_IOCTL calls
rpmsg_chrdev_eptdev_destroy(), which takes ept_lock itself, so the switch
as a whole must not hold it.
Fixes: 5550201c0fe2 ("rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Yu Zhang <yuz08559@xxxxxxxxx>
---
drivers/rpmsg/rpmsg_char.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 550fda2..49c0784 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -343,7 +343,15 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
break;
}
set = !!arg;
- ret = rpmsg_set_flow_control(eptdev->ept, set, eptdev->chinfo.dst);
+ ret = mutex_lock_interruptible(&eptdev->ept_lock);
+ if (ret)
+ break;
+ if (eptdev->ept)
+ ret = rpmsg_set_flow_control(eptdev->ept, set,
+ eptdev->chinfo.dst);
+ else
+ ret = -EPIPE;
+ mutex_unlock(&eptdev->ept_lock);
break;
case RPMSG_DESTROY_EPT_IOCTL:
/* Don't allow to destroy a default endpoint. */
--
2.43.0