[PATCH 9/9] arm64: dts: airoha: en7581: add integrated switch node

[Christian Marangi]

Add the integrated switch node complete of the internal PHY with the PHY
address and the supported leds attached.

Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
 arch/arm64/boot/dts/airoha/en7581.dtsi | 147 +++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
index f214fa3a3e2b..83ae41271f96 100644
--- a/arch/arm64/boot/dts/airoha/en7581.dtsi
+++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/en7523-clk.h>
 #include <dt-bindings/reset/airoha,en7581-reset.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -470,6 +471,152 @@ fixed-link {
 			};
 		};
 
+		switch: switch@1fb58000 {
+			compatible = "airoha,en7581-switch";
+			reg = <0 0x1fb58000 0 0x8000>;
+			resets = <&scuclk EN7581_GSW_RST>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gsw_port1: port@1 {
+					reg = <1>;
+					phy-mode = "internal";
+					phy-handle = <&gsw_phy1>;
+				};
+
+				gsw_port2: port@2 {
+					reg = <2>;
+					phy-mode = "internal";
+					phy-handle = <&gsw_phy2>;
+				};
+
+				gsw_port3: port@3 {
+					reg = <3>;
+					phy-mode = "internal";
+					phy-handle = <&gsw_phy3>;
+				};
+
+				gsw_port4: port@4 {
+					reg = <4>;
+					phy-mode = "internal";
+					phy-handle = <&gsw_phy4>;
+				};
+
+				port@6 {
+					reg = <6>;
+					ethernet = <&gdm1>;
+					phy-mode = "internal";
+
+					fixed-link {
+						speed = <10000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gsw_phy1: ethernet-phy@9 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <9>;
+					phy-mode = "internal";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy1_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy1_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy2: ethernet-phy@a {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <10>;
+					phy-mode = "internal";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy2_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy2_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy3: ethernet-phy@b {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <11>;
+					phy-mode = "internal";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy3_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy3_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy4: ethernet-phy@c {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <12>;
+					phy-mode = "internal";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy4_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy4_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
 		crypto@1fb70000 {
 			compatible = "airoha,en7581-eip93", "inside-secure,safexcel-eip93ies";
 			reg = <0x0 0x1fb70000 0x0 0x1000>;
-- 
2.55.0