[PATCH v2 11/12] arm64: dts: qcom: sc7280: Add GP M/N clock controller

[Taniya Das]

Add the GP M/N clock controller and its pin configuration for SC7280.
The controller uses the PDM XO4 and AHB clocks from GCC and routes its
output to gpio60.

Signed-off-by: Taniya Das <taniya.das@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kodiak.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index 8c7523602d2719775b8f5c6a8cef138a93292721..de27a051ee3b0e9046ff97b8e6fe0164985d7b17 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -4442,6 +4442,20 @@ usb2_role_switch: endpoint {
 			};
 		};
 
+		gp_mn: clock-controller@88d3000 {
+			compatible = "qcom,sc7280-gp-mnd";
+			reg = <0x0 0x088d3000 0x0 0x1000>;
+			clocks = <&gcc GCC_PDM_XO4_CLK>,
+				 <&gcc GCC_PDM_AHB_CLK>;
+			clock-names = "pdm_clk", "ahb_clk";
+			#clock-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gp_mn_active>;
+			assigned-clocks = <&gcc GCC_PDM_XO4_CLK>;
+			assigned-clock-rates = <4800000>;
+			status = "disabled";
+		};
+
 		qspi: spi@88dc000 {
 			compatible = "qcom,sc7280-qspi", "qcom,qspi-v1";
 			reg = <0 0x088dc000 0 0x1000>;
@@ -6653,6 +6667,13 @@ mi2s0_sclk: mi2s0-sclk-state {
 				function = "mi2s0_sck";
 			};
 
+			gp_mn_active: gp-mn-active-state {
+				pins = "gpio60";
+				function = "gp_mn";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			mi2s0_data0: mi2s0-data0-state {
 				pins = "gpio98";
 				function = "mi2s0_data0";

-- 
2.34.1