[PATCH 0/4] arm64: dts: qcom: Add support for Mahua QCB

[Sivansh Gupta]

Add initial device tree support for the Mahua QCB. The QCB (Qualcomm
Compute Board) is a board built on the Qualcomm Mahua SoC. Mahua is a
12 core derivative of the Glymur SoC.

Unlike the CRD, the QCB is suitable for compute workloads,
power measurements and oscilloscope-based hardware validation.

This series adds the bindings the board relies on and commonizes
Glymur QCB and Mahua QCB before enabling the device tree for Mahua
QCB:
- Document the qcom,mahua-qcb board compatible.
- Add Mahua QCB to QSEECOM allowlist.
- Moved common device tree nodes between Glymur QCB and Mahua QCB to
glymur-qcb.dtsi.

P.S. 
I tried b4 send, but for some reason the coverletter b4 generates doesnt
detect moving glymur-qcb.dts to glymur-qcb.dtsi.
Git also for some reason didnt detect the move by default, had to use
--find-copies and send the patch using git send-email.


Gopikrishna Garmidi (2):
  dt-bindings: arm: qcom: Add Mahua QCB
  firmware: qcom: scm: Allow QSEECOM on the Mahua QCB

Sivansh Gupta (2):
  arm64: dts: qcom: Commonize glymur-qcb.dts to glymur-qcb.dtsi
  arm64: dts: qcom: Add Mahua QCB

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/glymur-qcb.dts       | 667 +-----------------
 .../qcom/{glymur-qcb.dts => glymur-qcb.dtsi}  |  28 -
 arch/arm64/boot/dts/qcom/mahua-qcb.dts        |  38 +
 drivers/firmware/qcom/qcom_scm.c              |   1 +
 6 files changed, 42 insertions(+), 694 deletions(-)
 copy arch/arm64/boot/dts/qcom/{glymur-qcb.dts => glymur-qcb.dtsi} (94%)
 create mode 100644 arch/arm64/boot/dts/qcom/mahua-qcb.dts

-- 
2.43.0