[PATCH 2/2] arm64: dts: qcom: glymur-crd: Move the PCIe slot supplies to the Port nodes

[Manivannan Sadhasivam]

Since all controller nodes have Root Port nodes, move the slot supplies to
the port nodes where they should belong to.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index e27c697e3170..7e16add069b1 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -743,13 +743,13 @@ &mdss_dp3_phy {
 };
 
 &pcie3b {
-	vddpe-3v3-supply = <&vreg_nvmesec>;
-
 	pinctrl-0 = <&pcie3b_default>;
 	pinctrl-names = "default";
 };
 
 &pcie3b_port0 {
+	vpcie3v3-supply = <&vreg_nvmesec>;
+
 	reset-gpios = <&tlmm 155 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 157 GPIO_ACTIVE_LOW>;
 };
@@ -789,8 +789,6 @@ wifi@0 {
 };
 
 &pcie5 {
-	vddpe-3v3-supply = <&vreg_nvme>;
-
 	pinctrl-0 = <&pcie5_default>;
 	pinctrl-names = "default";
 
@@ -805,13 +803,13 @@ &pcie5_phy {
 };
 
 &pcie5_port0 {
+	vpcie3v3-supply = <&vreg_nvme>;
+
 	reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
 };
 
 &pcie6 {
-	vddpe-3v3-supply = <&vreg_wwan>;
-
 	pinctrl-0 = <&pcie6_default>;
 	pinctrl-names = "default";
 
@@ -826,6 +824,8 @@ &pcie6_phy {
 };
 
 &pcie6_port0 {
+	vpcie3v3-supply = <&vreg_wwan>;
+
 	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
 };
-- 
2.43.0