Re: [PATCH v2 1/2] drm/radeon: process the VCE interrupt on SI and Trinity

[Matheus Tagliari]

Hi Alex, Timur, Christian,

Thanks Alex for picking these up, and Christian for the Trinity
background.

Timur, yes, that is possible. The only place where Trinity/Richland
gets the interrupt enabled is the family check in vce_v1_0_start() in
patch 2.  Today it reads "rdev->family < CHIP_BONAIRE", which also
matches CHIP_ARUBA.  Narrowing it to

	if (rdev->family >= CHIP_TAHITI && rdev->family < CHIP_BONAIRE)

enables it on Tahiti, Pitcairn, Verde, Oland and Hainan only, and
leaves Trinity/Richland (and CIK) as they were.  I built vce_v1_0.o
with that change against 6.12 and checked the gate against the
radeon_family enum: SI on, ARUBA and CIK off.  On SI the generated
code is the same register write I tested on the Cape Verde card, so
the earlier results still apply there.  I cannot test the Trinity side.

The handling added to evergreen_irq_process() by patch 1 stays
harmless on Trinity: with the trap interrupt left disabled it is
never raised.

Since the series is already applied, I did not want to send a v3 on
top of it unasked.  If Christian would still prefer to keep Trinity
out of the picture, especially for stable, I can send this as a
small follow-up against the current tree right away.  Otherwise I
will leave it as it is.

Thanks,
Matheus