[PATCH 4/4] ARM: s3c: crag6410-module: configure wm0010 interrupt trigger type

[Dmitry Torokhov]

The wm0010 driver currently defaults to IRQF_TRIGGER_FALLING when
pdata.irq_flags is unset. Unconditionally set the default trigger type
on S3C_EINT(4)'s irq_data to IRQ_TYPE_EDGE_FALLING in
wlf_gf_module_register() using irqd_set_trigger_type().

This configures the default trigger in board code in preparation for
updating wm0010 to rely on the pre-configured interrupt trigger and
dropping struct wm0010_pdata altogether.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
 arch/arm/mach-s3c/mach-crag6410-module.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 55f55e9b9a46..440f19d5c64f 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -8,6 +8,7 @@
 #include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
+#include <linux/irq.h>
 #include <linux/spi/spi.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio/property.h>
@@ -463,6 +464,9 @@ static int __init wlf_gf_module_register(void)
 	if (!soc_is_s3c64xx())
 		return 0;
 
+	irqd_set_trigger_type(irq_get_irq_data(S3C_EINT(4)),
+			      IRQ_TYPE_EDGE_FALLING);
+
 	return i2c_add_driver(&wlf_gf_module_driver);
 }
 device_initcall(wlf_gf_module_register);

-- 
2.56.0.307.g5fe7bd680c-goog