Re: [PATCH] arm64: dts: qcom: glymur-crd: Add pull-up for SD card detect

[Konrad Dybcio]

On 10/28/26 2:14 PM, Monish Chunara wrote:
> The SD card detect signal is active low and requires a defined high
> level when no card is inserted. With the GPIO bias disabled, the
> card-detect input can be left floating and result in spurious
> interrupts.
> 
> Enable the internal pull-up on the SD card detect GPIO to keep the
> signal at a defined level when the card is absent and avoid spurious
> card-detect interrupts.
> 
> Signed-off-by: Monish Chunara <monish.chunara@xxxxxxxxxxxxxxxx>
> ---

Fixes: 51fe74e44c69 ("arm64: dts: qcom: glymur-crd: Enable SD card")
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad