Re: [PATCH] arm64: dts: qcom: glymur-crd: Mark L4C regulator as boot-on to save power

[Bjorn Andersson]

On Fri, 09 Oct 2026 17:36:05 +0530, Kamal Wadhwa wrote:
> On current Glymur Rev-1 boards, the third USB controller and PHY are
> not enabled, so the L4C regulator has no active consumers. The
> regulator node cannot be removed, however, since Rev-2 boards will
> enable the corresponding USB hardware.
> 
> This rail may have been left enabled by the bootloader. The RPMH
> regulator driver cannot query real hardware state, so without
> regulator-boot-on the core assumes the rail is already off and never
> issues an explicit disable during late cleanup, leaving it enabled
> indefinitely while unused.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: glymur-crd: Mark L4C regulator as boot-on to save power
      commit: 09096b4ea1bd00730b1a10584b6405119fd28fc4

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>