Re: [PATCH] arm64: dts: qcom: glymur-crd: Add pull-up for SD card detect

[Bjorn Andersson]

On Wed, 28 Oct 2026 18:44:20 +0530, Monish Chunara wrote:
> The SD card detect signal is active low and requires a defined high
> level when no card is inserted. With the GPIO bias disabled, the
> card-detect input can be left floating and result in spurious
> interrupts.
> 
> Enable the internal pull-up on the SD card detect GPIO to keep the
> signal at a defined level when the card is absent and avoid spurious
> card-detect interrupts.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: glymur-crd: Add pull-up for SD card detect
      commit: 25c209e099120cb312b2c725fb7149d78ac3c581

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>