Re: [PATCH v2 2/3] thermal/drivers/amlogic: add S4 support

[Martin Blumenstingl]

On Sun, Nov 8, 2026 at 10:07 PM Martin Blumenstingl
<martin.blumenstingl@xxxxxxxxxxxxxx> wrote:
>
> On Fri, Nov 6, 2026 at 11:19 AM
> <christian.koever-draxl@xxxxxxxxxxxxxxxxxx> wrote:
> >
> > From: Christian Stefan Kövér-Draxl <ckoever@xxxxxxxxxx>
> >
> > The S4 CPU sensor reads its calibration through the secure monitor and
> > otherwise matches the T7 setup, including the separate bus and
> > functional clocks, so reuse the T7 data for it.
Sorry for following up so quickly. I think I mis-understood this.
>From what I see in the dt-bindings patch the thermal sensor(s) on S4
and T7 are fully identical. If that's the case then sashiko is right
and this patch needs to be dropped (and replaced by using t7 as a
fallback compatible string) in dt-bindings and .dtsi