Fw: Re: [BUG] ath10k_pci: QCA9377 reports recurring PCIe AER RxErr/BadDLLP errors

From: yphtno

Date: Sun Nov 08 2026 - 17:40:13 EST





Sent with Proton Mail secure email.

------- Forwarded Message -------
From: yphtno <yphtno@xxxxxxxxx>
Date: On Sunday, 8 November 2026 at 2:14 PM
Subject: Re: [BUG] ath10k_pci: QCA9377 reports recurring PCIe AER RxErr/BadDLLP errors
To: ath10k@xxxxxxxxxxxxxxxxxxx <ath10k@xxxxxxxxxxxxxxxxxxx>
CC: linux-wireless@xxxxxxxxxxxxxxx <linux-wireless@xxxxxxxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>


> Hello,
>
> I am experiencing a similar issue with a Qualcomm Atheros QCA9377 wireless adapter using the ath10k_pci driver on an Acer Aspire F5-573G.
>
> I found the existing discussion about recurring PCIe AER errors on the QCA9377 and wanted to share my hardware's behavior in case it is related.
>
> Hardware:
>
> - Laptop: Acer Aspire F5-573G
>
> - Wi-Fi adapter: Qualcomm Atheros QCA9377
>
> - PCI ID: 168c:0042
>
> - Hardware revision: hw1.1
>
> - Driver: ath10k_pci
>
> - Firmware: WLAN.TF.2.1-00021-QCARMSWP-1
>
> - Kernel version: [INSERT `uname -r`]
>
> - BIOS version: [INSERT BIOS VERSION]
>
>
> Observed behavior:
>
> The Wi-Fi connection intermittently fails during normal use. My kernel logs show recurring PCIe AER correctable physical-layer errors involving the QCA9377, including:
>
> - RxErr
>
> - BadDLLP
>
> - Rollover
>
> - Timeout
>
>
> I have also observed the following ath10k message:
>
> `ath10k_pci 0000:03:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0`
>
> The firmware appears to load successfully.
>
> ASPM testing:
>
> I have tried booting with `pcie_aspm=off`. It sometimes appears to improve Wi-Fi reliability, but the connection still fails most of the time. I have not yet completed a controlled comparison, so I cannot confirm whether ASPM is responsible.
>
> The issue has persisted after reinstalling Arch Linux.
>
> Additional information:
>
> I can provide full kernel logs, `lspci -vv` output, BIOS information, and perform additional testing if needed.
>
> I would appreciate any guidance on whether this could be related to the existing QCA9377 PCIe AER issue, or whether further investigation is needed.
>
> Thank you for your time.
>
>
>
> Sent with Proton Mail secure email.