[PATCH net v7 4/4] can: j1939: reject a CTS that names more packets than the message has

[Chaosheng Qu]

j1939_xtp_rx_cts_one() rejects a zero packet number and a window above
pkt.block, but not a packet number above pkt.total.  It then stores
"pkt - 1" in pkt.tx_acked, and the transmitter reports that value back in
an
ETP.CM_DPO.

That value is what j1939_xtp_rx_dpo_one() now bounds, so an oversized CTS
is
currently caught one step later and reported as a bad EDPO offset.  Reject
it where it originates instead, with the abort code that describes it:
J1939_XTP_ABORT_ECTS_TOO_BIG, "ECTS requested packets exceeds message
size".

Signed-off-by: Chaosheng Qu <quchaosheng000406@xxxxxxx>
---
 net/can/j1939/transport.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 5f05c15114ce..6cb3dec49f3f 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1504,6 +1504,15 @@ j1939_xtp_rx_cts_one(struct j1939_session *session, struct sk_buff *skb)
 		goto out_session_cancel;
 	else if (dat[1] > session->pkt.block /* 0xff for etp */)
 		goto out_session_cancel;
+	else if (pkt > session->pkt.total) {
+		/* The responder asks for more packets than the message has.
+		 * pkt - 1 becomes pkt.tx_acked below, and the transmitter
+		 * reports that value in an ETP.CM_DPO, where it would name a
+		 * packet past the end of the message.
+		 */
+		err = J1939_XTP_ABORT_ECTS_TOO_BIG;
+		goto out_session_cancel;
+	}
 
 	/* set packet counters only when not CTS(0) */
 	session->pkt.tx_acked = pkt - 1;
-- 
2.43.0