[PATCH 5/9] arm64: dts: marvell: Fix node names

[Rob Herring (Arm)]

Fix various node names to use standard names.

Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
---
 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi              |  2 +-
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts |  2 +-
 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts    | 10 +++++-----
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 4878773883c9..814b8a2e8ea9 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -231,7 +231,7 @@ sdhci: mmc@805c0000 {
 		 * Dedicated section for devices behind 32bit controllers so we
 		 * can configure specific DMA mapping for them
 		 */
-		behind-32bit-controller@7f000000 {
+		dma-bus@0 {
 			compatible = "simple-bus";
 			#address-cells = <0x2>;
 			#size-cells = <0x2>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 4efa2a1dbda7..101d1518e28f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -324,7 +324,7 @@ cp0_led1_pins: led1-pins {
 		marvell,function = "gpio";
 	};
 
-	cp0_copper_eth_phy_reset: copper-eth-phy-reset {
+	cp0_copper_eth_phy_reset: copper-eth-phy-reset-pins {
 		marvell,pins = "mpp43";
 		marvell,function = "gpio";
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index 06a861f83ad8..68c8489e0a6f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -165,7 +165,7 @@ cpu_active: cpu-active {
 		};
 	};
 	cooling-maps {
-		fan-map {
+		map-fan {
 			trip = <&cpu_active>;
 			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>,
 					<&chassis_fan_group1 64 THERMAL_NO_LIMIT>;
@@ -191,19 +191,19 @@ flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-max-frequency = <20000000>;
-		partition@u-boot {
+		partition@0 {
 			label = "u-boot";
 			reg = <0x00000000 0x001f0000>;
 		};
-		partition@u-boot-env {
+		partition@1f0000 {
 			label = "u-boot-env";
 			reg = <0x001f0000 0x00010000>;
 		};
-		partition@ubi1 {
+		partition@200000 {
 			label = "ubi1";
 			reg = <0x00200000 0x03f00000>;
 		};
-		partition@ubi2 {
+		partition@4100000 {
 			label = "ubi2";
 			reg = <0x04100000 0x03f00000>;
 		};

-- 
2.53.0