Re: [PATCH RFC 20/23] arm64: dts: qcom: sm8650: move EL1 Gunyah nodes to sm8650-el1.dtsi
From: Neil Armstrong
Date: Mon Nov 16 2026 - 02:41:21 EST
On 11/13/26 20:08, Val Packett wrote:
On 11/13/26 3:38 PM, Neil Armstrong wrote:
The reserved memory map, remoteprocs, SMP2P, IPA, GPU zap shader and the
q6prm LPASS clocks only apply when booting at EL1 under Gunyah, and
boards booting Linux at EL2 had to delete them.
This might be true in practice for this specific SoC just due to these being the only devices made,
but in general, "boots Linux at EL2" does not automatically imply "does not use smp2p/remoteprocs" (see Glymur; and earlier laptops with hacks that happily use ADSP under EL2) so the dtsi that includes all remoteprocs being called "el1" is quite strange IMO
Yes because the early boot loads the ADSP "lite" firmware for USB-C and battery management,
which is not the case of other non-compute platforms.
And you can entirely not use the DSPs on those platforms as-well, all the nodes
I moved are entirety Gunyah specific on this platform since when booting
from EL2 without Gunyah the firmware interfaces to load the firmwares,
setup the clocks, power domains and IOMMU doesn't exist.
SI instead of el1 I could use "gunyah" ?
Neil
Move them into sm8650-el1.dtsi, included by the EL1 boards, and drop the
node deletions from the Deckard dts.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
.../boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts | 1 +
arch/arm64/boot/dts/qcom/sm8650-el1.dtsi | 775 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8650-hdk.dts | 1 +
arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 1 +
arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 1 +
arch/arm64/boot/dts/qcom/sm8650-valve-deckard.dts | 21 -
arch/arm64/boot/dts/qcom/sm8650.dtsi | 774 +-------------------
7 files changed, 801 insertions(+), 773 deletions(-
[..]
Thanks,
~val