[PATCH v2 0/2] Add support for the BOE ILI97680A AMOLED panel of the Motorola Signature
From: Venkat Yadlapati via B4 Relay
Date: Mon Nov 16 2026 - 02:42:10 EST
The Motorola Signature uses a 1264x2780 BOE AMOLED panel driven by an
Ilitek ILI97680A. It is a MIPI DSI command mode panel with DSC 1.2
compression on four lanes. This series adds the devicetree binding and a
driver for it.
Two things are specific to this panel. The DSC picture parameter set is
written to a vendor register on command page 7 instead of being sent as a
standard PPS packet, and the brightness range is 0 to 16180 over DCS.
Tested on a Motorola Signature with the msm DRM driver: the panel lights
up at its native resolution and Phosh renders on it.
I used an LLM (Claude) to help write these patches and their commit
messages. I reviewed all of them and tested the result on the device.
---
Changes in v2:
- Give the panel its own compatible, "motorola,vantage-boe-ili97680a",
with "ilitek,ili97680a" as fallback: the mode, DSC settings and
initialization sequence belong to this BOE panel, not to every
ILI97680A panel. BOE's part number is not known, so the name follows
the "<device>-<glass vendor>-<controller>" style of the Xiaomi and
Lenovo NT36523 panels.
- Driver: match the panel compatible.
- Link to v1: https://patch.msgid.link/20261116-vantage-panel-v1-0-30b95bd49216@xxxxxxxxx
---
Venkat Yadlapati (2):
dt-bindings: display: panel: Add Ilitek ILI97680A
drm/panel: Add Ilitek ILI97680A DSC command mode panel driver
.../bindings/display/panel/ilitek,ili97680a.yaml | 75 ++++
MAINTAINERS | 6 +
drivers/gpu/drm/panel/Kconfig | 16 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili97680a.c | 494 +++++++++++++++++++++
5 files changed, 592 insertions(+)
---
base-commit: 39e407b553ec15d4a233b651531ad431ed7542be
change-id: 20261116-vantage-panel-9b6254aa0a42
Best regards,
--
Venkat Yadlapati <venkat.yadlapati@xxxxxxxxx>