[PATCH v2 0/3] Add read-only SpacemiT K3 eFuse support

From: Jiayu Du

Date: Mon Nov 16 2026 - 02:55:06 EST


This series adds read-only NVMEM access to bank 0 and bank 7 of the
SpacemiT K3 eFuse controller. These banks contain temperature calibration
parameters and other configuration data.

Tested on a SpacemiT K3 COM260 Kit: shadow reload completed successfully,
and reads of both banks matched v1. Repeated reads and reads crossing
bank/keepout boundaries returned the expected data.

Changes in v2:
- Trigger a shadow reload before polling FUSE_READY; fail probe on timeout.
- Enable the clock only while accessing hardware and leave the shared
reset deasserted on teardown.
- Explain why the root key and SSK registers are excluded.
- Use an aligned __le32 cache instead of put_unaligned_le32().
- Drop unnecessary Kconfig dependencies and the bootloader initialization
requirement.
- Use devm_platform_ioremap_resource() and align the register definitions.
- Enable the eFuse node by default in k3.dtsi.
- Add Conor's Acked-by to the binding patch.

v1: https://lore.kernel.org/all/20261106060525.346873-1-duge1256@xxxxxxxxx/

Jiayu Du (3):
dt-bindings: nvmem: Add SpacemiT K3 eFuse controller
nvmem: Add read-only SpacemiT K3 eFuse support
riscv: dts: spacemit: Add K3 eFuse and temperature trim cells

.../bindings/nvmem/spacemit,k3-efuse.yaml | 63 ++++++
MAINTAINERS | 6 +
arch/riscv/boot/dts/spacemit/k3.dtsi | 23 ++
drivers/nvmem/Kconfig | 11 +
drivers/nvmem/Makefile | 1 +
drivers/nvmem/spacemit-k3-efuse.c | 199 ++++++++++++++++++
6 files changed, 303 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/spacemit,k3-efuse.yaml
create mode 100644 drivers/nvmem/spacemit-k3-efuse.c


base-commit: d6bcfc94eb4da6e089c5473970cd96727292fd97
--
2.43.0