Re: [PATCH v1 2/6] clk: starfive: jh71x0: Move reset controller registration to jh71x0 common code
From: Changhuang Liang
Date: Mon Nov 16 2026 - 03:01:20 EST
Hi, Jerome
> > jh7110_reset_controller_register() is only tied to the JH7110 system
> > clock driver by its location. Its logic is generic: hand the CRG
> > register base to the reset driver through an auxiliary device.
> >
> > Move it to clk-starfive-jh71x0.c as jh71x0_reset_controller_register()
> > so that the clock drivers of other StarFive SoCs can reuse it, and
> > make
> > CLK_STARFIVE_JH71X0 select AUXILIARY_BUS accordingly.
> >
> > While at it, replace the open-coded auxiliary device allocation, init,
> > add and release handling with devm_auxiliary_device_create(), which
> > already implements all of it. The register base is now passed to the
> > reset driver as platform data of the auxiliary device, so struct
> > jh71x0_reset_adev and the embedded auxiliary device go away.
> >
> > The auxiliary device ID is dropped: every CRG already uses a distinct
> > auxiliary device name, so the ID is not needed to keep the device
> > names unique, and it is always 0 now.
> >
> > Since the helper now lives in clk-starfive-jh71x0.c, the auxiliary
> > device names are prefixed with "clk_starfive_jh71x0" instead of
> > "clk_starfive_jh7110_sys". Update the auxiliary_device_id table of the
> > JH7110 reset driver in the same patch to keep the tree bisectable.
> >
> > Signed-off-by: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
> > ---
> > drivers/clk/starfive/Kconfig | 2 +-
> > .../clk/starfive/clk-starfive-jh7110-aon.c | 2 +-
> > .../clk/starfive/clk-starfive-jh7110-isp.c | 2 +-
> > .../clk/starfive/clk-starfive-jh7110-stg.c | 2 +-
> > .../clk/starfive/clk-starfive-jh7110-sys.c | 59 +------------------
> > .../clk/starfive/clk-starfive-jh7110-vout.c | 2 +-
> > drivers/clk/starfive/clk-starfive-jh7110.h | 4 --
> > drivers/clk/starfive/clk-starfive-jh71x0.c | 24 ++++++++
> > drivers/clk/starfive/clk-starfive-jh71x0.h | 2 +
> > .../reset/starfive/reset-starfive-jh7110.c | 19 +++---
> > include/soc/starfive/reset-starfive-jh71x0.h | 10 ++--
> > 11 files changed, 45 insertions(+), 83 deletions(-)
> >
> > diff --git a/drivers/clk/starfive/Kconfig
> > b/drivers/clk/starfive/Kconfig index bd29358ffeec..51716655554f 100644
> > --- a/drivers/clk/starfive/Kconfig
> > +++ b/drivers/clk/starfive/Kconfig
> > @@ -2,6 +2,7 @@
> >
> > config CLK_STARFIVE_JH71X0
> > bool
> > + select AUXILIARY_BUS
> >
> > config CLK_STARFIVE_JH7100
> > bool "StarFive JH7100 clock support"
> > @@ -32,7 +33,6 @@ config CLK_STARFIVE_JH7110_PLL config
> > CLK_STARFIVE_JH7110_SYS
> > bool "StarFive JH7110 system clock support"
> > depends on ARCH_STARFIVE || COMPILE_TEST
> > - select AUXILIARY_BUS
> > select CLK_STARFIVE_JH71X0
> > select RESET_STARFIVE_JH7110 if RESET_CONTROLLER
>
> You've switched to imply for the new controller you are introducing later in
> this series.
> You should probably be consistent and align this one too. Not in this change
> though, it would be unrelated.
I'm not going to put this suggestion into the current series for now. I plan to send it
as a separate patch later. Do you think that's okay?
>
> This change otherwise looks good to me. It requires Philipp's opinion as it is
> touching reset too.
>
> --
> Jerome
Best Regards,
Changhuang