[PATCH v2 1/2] arm64: dts: qcom: talos: Add graph port placeholders for USB Type-C muxing
From: Akash Kumar
Date: Mon Nov 16 2026 - 06:47:10 EST
Add empty port/endpoint nodes on the primary USB QMP PHY (usb_qmpphy)
and the usb_1/usb_2 dwc3 controllers, along with orientation-switch on
the PHY. These placeholders let board files wire up a USB-C PD
controller's HS/SS endpoints directly via
&label { remote-endpoint = <...>; }; instead of redeclaring the
port/ports structure on the shared nodes.
Signed-off-by: Akash Kumar <akakum@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/talos.dtsi | 35 +++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index 1d74e459f892..04636fd88807 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -5078,7 +5078,21 @@ usb_qmpphy: phy@88e6000 {
#phy-cells = <0>;
+ orientation-switch;
+
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_qmpphy_out: endpoint {
+ };
+ };
+ };
};
usb_qmpphy_2: phy@88e8000 {
@@ -5163,7 +5177,21 @@ usb_1: usb@a600000 {
wakeup-source;
dma-coherent;
+ usb-role-switch;
+
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+ };
};
usb_2: usb@a800000 {
@@ -5220,7 +5248,14 @@ usb_2: usb@a800000 {
wakeup-source;
dma-coherent;
+ usb-role-switch;
+
status = "disabled";
+
+ port {
+ usb_2_dwc3_hs: endpoint {
+ };
+ };
};
tsens0: thermal-sensor@c263000 {
--
2.43.0