[PATCH v2 4/4] arm64: dts: qcom: glymur-crd: Enable HDMI output via PS195
From: Nabige Aala
Date: Mon Nov 16 2026 - 06:50:14 EST
From: Mahadevan P <mahadevan.p@xxxxxxxxxxxxxxxx>
Enable HDMI output on Glymur CoB/SiP, Mahua and Kalambo CRDs through
their shared glymur-crd.dtsi.
Describe the PS195 on i2c13 (qup1_se5, GPIO52=SDA GPIO53=SCL). The
PS195 GPIO11 is pulled high on this board, selecting I2C slave address
0x48. Add the three HDMI power supplies with their regulator-enable
GPIOs and pinctrl states.
Connect the four-lane DP2 path through the USB2 QMP combo PHY to the
PS195 DisplayPort input, and wire the PS195 HDMI output to the HDMI
connector. Add the GPIO126 HPD pinctrl state to glymur.dtsi.
Signed-off-by: Mahadevan P <mahadevan.p@xxxxxxxxxxxxxxxx>
Signed-off-by: Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 147 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/glymur.dtsi | 6 ++
2 files changed, 153 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index 2ec62423ad79..d875ed69460e 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -63,6 +63,17 @@ switch-lid {
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&hdmi_bridge_out>;
+ };
+ };
+ };
+
pmic-glink {
compatible = "qcom,glymur-pmic-glink",
"qcom,pmic-glink";
@@ -142,6 +153,53 @@ vreg_edp_3p3: regulator-edp-3p3 {
regulator-boot-on;
};
+ vreg_hdmi_0p95: regulator-hdmi-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_HDMI_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ gpio = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <1000>;
+
+ pinctrl-0 = <&hdmi_0p95_reg_en>;
+ pinctrl-names = "default";
+ };
+
+ vreg_hdmi_1p2: regulator-hdmi-1p2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_HDMI_1P2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ vin-supply = <&vreg_l18b0>;
+
+ gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <2000>;
+
+ pinctrl-0 = <&hdmi_1p2_reg_en>;
+ pinctrl-names = "default";
+ };
+
+ vreg_hdmi_3p3: regulator-hdmi-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_HDMI_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 170 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <2000>;
+
+ pinctrl-0 = <&hdmi_3p3_reg_en>;
+ pinctrl-names = "default";
+ };
+
vreg_misc_3p3: regulator-misc-3p3 {
compatible = "regulator-fixed";
@@ -519,6 +577,40 @@ touchscreen@38 {
};
};
+&i2c13 {
+ status = "okay";
+
+ hdmi-bridge@48 {
+ compatible = "parade,ps195";
+ reg = <0x48>;
+
+ vdd09-supply = <&vreg_hdmi_0p95>;
+ vdd12-supply = <&vreg_hdmi_1p2>;
+ vdd33-supply = <&vreg_hdmi_3p3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_bridge_in: endpoint {
+ remote-endpoint = <&usb_2_qmpphy_out_dp>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_bridge_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
&lpass_vamacro {
pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
pinctrl-names = "default";
@@ -545,6 +637,17 @@ &mdss_dp1_out {
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
+&mdss_dp2 {
+ pinctrl-0 = <&usb2_dp_hot_plug_detect>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&mdss_dp2_out {
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
@@ -826,6 +929,27 @@ ec_int_n_default: ec-int-n-state {
bias-disable;
};
+ hdmi_0p95_reg_en: hdmi-0p95-reg-en-state {
+ pins = "gpio55";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ hdmi_1p2_reg_en: hdmi-1p2-reg-en-state {
+ pins = "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ hdmi_3p3_reg_en: hdmi-3p3-reg-en-state {
+ pins = "gpio170";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
kybd_default: kybd-default-state {
pins = "gpio67";
function = "gpio";
@@ -1035,6 +1159,29 @@ &usb_1_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in1>;
};
+&usb_2_qmpphy {
+ /delete-property/ mode-switch;
+ /delete-property/ orientation-switch;
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /delete-node/ endpoint;
+
+ usb_2_qmpphy_out_dp: endpoint@0 {
+ reg = <0>;
+
+ data-lanes = <3 2 1 0>;
+ remote-endpoint = <&hdmi_bridge_in>;
+ };
+ };
+ };
+};
+
&usb_hs {
dr_mode = "host";
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 65a398c0a992..2d3f8fe2cf5d 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -6793,6 +6793,12 @@ data-pins {
bias-pull-up;
};
};
+
+ usb2_dp_hot_plug_detect: usb2-dp-hot-plug-detect-state {
+ pins = "gpio126";
+ function = "usb2_dp";
+ bias-disable;
+ };
};
ctcu@10001000 {
--
2.34.1