[PATCH v3 0/8] Add support for MIPS P8700
From: Aleksa Paunovic via B4 Relay
Date: Mon Nov 16 2026 - 06:55:42 EST
The MIPS P8700 is a multi-core RISC-V microprocessor system, supporting
both single-cluster and multi-cluster configurations. [1]
This series adds full description of the platform,
including the Boston FPGA board configured with a P8700 bitfile.
The P8700 cores support the RV64GCZba_Zbb (G = IMAFD) Standard ISA,
with a caveat: the A extension is only partially supported, and all ZAAMO
extension instructions are emulated on the SBI level. The device tree
intentionally does not reflect this fact. Vladimir Kondratiev's series
improves performance by directly substituting AMO instructions with LR/SC. [4]
The two patchsets do not depend on one another.
The board itself is the same board as 'img,boston', configured with a different
bitfile [3]. The Boston board has been supported since commit 6e62a888029b
("MIPS: generic: Support MIPS Boston development boards") (thanks to Maciej for finding the ref).
I tested this series both on QEMU and a Boston board
configured with a single P8700 CPU,
after applying the necessary U-Boot changes.
We are planning on upstreaming these as well.
Following the discussion in [2], I decided to drop the 'gf' prefix for all compatibles
and to rework the aclint-mtimer binding.
Links:
[1] https://mips.com/wp-content/uploads/2025/11/P8700-F_Programmers_Reference_Manual-TM.pdf
[2] https://lore.kernel.org/linux-riscv/20261109051050.105623-5-joel@xxxxxxxxx/
[3] https://training.mips.com/cps_mips/Examples/MD00901_Boot-MIPS_Example_Boot_Code_for_MIPS_Cores.pdf
[4] https://lore.kernel.org/all/20261026-lrsc-only-v3-0-ec29c8190fb1@xxxxxxxxxxxx/
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@xxxxxxxxxxxxx>
---
Changes in v3:
- Drop the 'gf' vendor prefix patch. The prefix isn't used anywhere.
- Replace 'gf,mips-p8700-*' compatibles with 'mips,p8700-*'
to match those already present in OpenSBI.
Other compatibles are also renamed for consistency.
Match the directory structure and binding names,
by replacing 'gf' with 'mips' everywhere.
- Add a MAINTAINERS entry.
- Change the `aclint-mtimer` binding, reversing the decision made in v2
and putting 'mtime' first when both 'mtime' and 'mtimecmp' are present.
- Link to v2: https://lore.kernel.org/r/20261103-p8700-dts-v2-0-3ac5d49f2c37@xxxxxxxxxxxxx
Changes in v2:
- Patch 1: Replace "MIPS Technology" with "MIPS Technologies".
- Patch 3: Name the FPGA used and add the versioned bitfile compatible.
- Patch 5: Drop hart indexes from MSWI.
- Patch 6: Swap mtimecmp and mtime, require reg-names both for mtime and mtimecmp on P8700.
- Original patch 7: Dropped.
- Patch 7 (previously 8): Remove additional harts that are not
present in the bitfile I have. Reflect changes made in patches 3, 5 and 6.
Remove riscv,cbom-block-size. Drop undocumented compatibles. Other minor changes.
- Link to v1: https://lore.kernel.org/r/20260914-p8700-dts-v1-0-3267f14ebce1@xxxxxxxxxxxxx
---
Aleksa Paunovic (8):
dt-bindings: riscv: cpus: add mips,p8700
dt-bindings: riscv: Add MIPS Boston board compatible
dt-bindings: interrupt-controller: Add MIPS P8700 APLIC
dt-bindings: interrupt-controller: Add MIPS P8700 ACLINT MSWI
dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER
riscv: dts: mips: Initial support for the P8700 Boston board
MAINTAINERS: Add entry for MIPS RISC-V SoC support
riscv: defconfig: Enable MIPS SoCs
.../bindings/interrupt-controller/riscv,aplic.yaml | 1 +
.../thead,c900-aclint-mswi.yaml | 11 ++
Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
Documentation/devicetree/bindings/riscv/mips.yaml | 33 +++++
.../bindings/timer/thead,c900-aclint-mtimer.yaml | 37 ++++++
MAINTAINERS | 7 ++
arch/riscv/Kconfig.socs | 6 +
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/mips/Makefile | 2 +
arch/riscv/boot/dts/mips/p8700-boston.dts | 135 +++++++++++++++++++++
arch/riscv/boot/dts/mips/p8700.dtsi | 82 +++++++++++++
arch/riscv/configs/defconfig | 1 +
12 files changed, 317 insertions(+)
---
base-commit: fd73f4a6659897191fa0d40695fe370925dd3780
change-id: 20260325-p8700-dts-41788f014227
Best regards,
--
Aleksa Paunovic <aleksa.paunovic@xxxxxxxxxxxxx>