[PATCH 0/2] MNT Reform 2: Fix the internal panel on i.MX8MQ
From: Christian Gmeiner
Date: Mon Nov 16 2026 - 07:11:58 EST
The internal eDP panel of the MNT Reform 2 with the i.MX8MQ module does
not show a stable picture. There are two problems.
The panel-edp mode for the Innolux N125HCE-GN1 is a 70 Hz mode that is
not in the EDID of the panel. Patch 1 replaces it with the 60 Hz timing
from the EDID.
LCDIF underflows at 1920x1080. Patch 2 connects DCSS to the MIPI-DSI
host instead and leaves LCDIF disabled.
Patch 2 depends on patch 1. The video PLL rate in the device tree is
four times the 138.78 MHz pixel clock of the new mode.
Signed-off-by: Christian Gmeiner <cgmeiner@xxxxxxxxxx>
---
Christian Gmeiner (2):
drm/panel-edp: Fix Innolux N125HCE-GN1 mode
arm64: dts: imx8mq-mnt-reform2: Drive the internal panel from DCSS
.../boot/dts/freescale/imx8mq-mnt-reform2.dts | 52 ++++++++++++++++++++--
drivers/gpu/drm/panel/panel-edp.c | 15 ++++---
2 files changed, 56 insertions(+), 11 deletions(-)
---
base-commit: aebb7274476403040d582c61478df8f4a7bf9cd3
change-id: 20261116-reform2-internal-panel-35c872aabb28
Best regards,
--
Christian Gmeiner <cgmeiner@xxxxxxxxxx>