Re: [PATCH 2/2] media: rockchip: rkcif: Honour the requested bytesperline on MIPI
From: Mehdi Djait
Date: Mon Nov 16 2026 - 08:13:31 EST
Hello,
On Mon, Nov 16, 2026 at 12:51:45PM +0100, Michael Riesch wrote:
> Hi Faizel,
>
> On 11/12/26 07:20, Faizel K B wrote:
> > Hi Michael,
> >
> > On Wed, Nov 11, 2026 at 10:46:43AM +0100, Michael Riesch wrote:
> >>
> >> Come to think of it, TRM p. 2111 says for e.g. VICAP_MIPI0_VLW_ID0:
> >> "Virtual line width of even frame for ID0 path(must be aligned to double
> >> word)." which I would interpret as "it must be a multiple of four
> >> bytes". What do you think?
> >>
> >
> > The VICAP register summary defines it.TRM part 1 (V1.0, page 2081)
> > "DW - Double WORD (64 bits) access". So 8 bytes.
>
> Ack.
>
> >>> +static void rkcif_stream_set_bytesperline(struct
> >>> v4l2_pix_format_mplane *pix,
> >>> + u32 req_bpl)
> >>> +{
> >>> + u32 min_bpl = ALIGN(pix->plane_fmt[0].bytesperline, 8);
> >>
> >> Please add support for the bytesperline field in all the plane_fmt
> >> entries here...
> >>
> >>> width = clamp_t(u32, pix->width, CIF_MIN_WIDTH, CIF_MAX_WIDTH);
> >>> + req_bpl = pix->plane_fmt[0].bytesperline;
> >>
> >> ... and here.
> >>
> >>> ret = v4l2_fill_pixfmt_mp(pix, fmt->fourcc, width, height);
> >>> if (ret)
> >>> return ret;
> >>>
> >>> + if (stream->interface->type == RKCIF_IF_MIPI)
> >>> + rkcif_stream_set_bytesperline(pix, req_bpl);
> >>
> >> Why is this restricted to the MIPI interfaces?
> >>
> >
> > The MIPI formats all have a single plane, and the MIPI path already
> > programs the line width from bytesperline. The DVP path uses the width,
> > and I can't test it. But I agree it should not depend on the interface.
> >
> > For v2 I would:
> >
> > - take the requested bytesperline of all planes into account, and use
> > the largest for all planes, as the DVP has one line width register
> > for Y and UV
> > - compute the sizeimage of each plane from it
> > - limit it to the line width field (20 bits MIPI, 15 bits DVP)
> > - program RKCIF_DVP_VIR_LINE_WIDTH from bytesperline, with the current
> > value as the minimum
> >
> > Does that sound ok?
>
> That does sound reasonable, yes.
>
> > A question on the DVP: the PX30 TRM (Part 2, 5.3) says raw data is
> > stored as 16 bits per pixel, even from an 8-bit source. This matches
> > the width * 2 in the driver. But for V4L2_PIX_FMT_S*8 (e.g.
> > V4L2_PIX_FMT_SRGGB8) bytesperline is the width, so the buffer is half
> > the size the hardware writes. Am I missing something?
>
> I don't have any PX30 board, and actually it is the first time I hear
> about that. Maybe Mehdi can chime in?
Unfortunately I also don't have hw with DVP and the one time I did look
online, it is really not that easy to find.
The PX30 board I used to delevop the rkcif is a custom hw that I don't
have access to anymore.
--
Kind Regards
Mehdi Djait