[RFC PATCH 4/4] drm/panel: simple: Keep the enable GPIO as left by the bootloader

From: Màxim Pedraza Padilla

Date: Mon Nov 16 2026 - 08:27:40 EST


The enable GPIO is requested as output low at probe, which turns the
panel off and blanks a splash screen the bootloader left on it, even
when the display state is read out and kept.

Request it with GPIOD_ASIS instead, and set it as output when the panel
is powered up, since it may still be an input if the bootloader didn't
touch it.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Màxim Pedraza Padilla <maximpedraza@xxxxxxxxx>
---
drivers/gpu/drm/panel/panel-simple.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index a944c34642dc..9d2aa4d16f97 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -341,7 +341,7 @@ static int panel_simple_resume(struct device *dev)
return err;
}

- gpiod_set_value_cansleep(p->enable_gpio, 1);
+ gpiod_direction_output(p->enable_gpio, 1);

if (p->desc->delay.prepare)
msleep(p->desc->delay.prepare);
@@ -688,7 +688,7 @@ static struct panel_simple *panel_simple_probe(struct device *dev)
return ERR_CAST(panel->supply);

panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
- GPIOD_OUT_LOW);
+ GPIOD_ASIS);
if (IS_ERR(panel->enable_gpio))
return dev_err_cast_probe(dev, panel->enable_gpio,
"failed to request GPIO\n");
--
2.39.5