[PATCH v3 2/2] ACPI: platform: Add basic support for ACPI 6.5 fixed clock resources

From: Paul Cercueil

Date: Mon Nov 16 2026 - 08:53:22 EST


ACPI 6.5 introduced a clock input resource descriptor, which allows to
specify in the ACPI tables what clocks are connected to a given device.

This patch adds support for the most basic clock resource, which is the
one that represents a fixed clock. The new code will then create a
clk_hw for each fixed clock resource, which is then made available to
the device drivers, that can obtain it through a regular call to
clk_get(NULL).

Signed-off-by: Paul Cercueil <paul.cercueil@xxxxxxxxxxx>

---

v3: No change

v2:
- Use the calculated clock name in devm_clk_hw_register_fixed_rate()
instead of the device name
- Make sure clkres->scale is <= 2. The field is 2 bits but the value
clkres->scale == 3 is not defined in the spec.
- Compute the fraction numerator using 64-bit math, to make sure it
won't overflow on 32-bit systems.
- Initialize clocks only when the device_type matches
ACPI_BUS_TYPE_DEVICE.
- Use a shorter name for clocks as the hard limit is 16 characters
including the terminator.
---
drivers/acpi/acpi_platform.c | 64 ++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)

diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c
index 80ea7121744d..71322cdcf0dd 100644
--- a/drivers/acpi/acpi_platform.c
+++ b/drivers/acpi/acpi_platform.c
@@ -10,17 +10,27 @@

#include <linux/acpi.h>
#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/ioport.h>
+#include <linux/kconfig.h>
#include <linux/kernel.h>
+#include <linux/list.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/units.h>

#include "internal.h"

+struct acpi_clk_data {
+ struct device *dev;
+ unsigned int idx;
+};
+
/* Exclude devices that have no _CRS resources provided */
#define ACPI_ALLOW_WO_RESOURCES BIT(0)

@@ -130,6 +140,57 @@ static unsigned int acpi_platform_resource_count(struct acpi_resource *ares, voi
return AE_CTRL_TERMINATE;
}

+static int acpi_add_fixed_clock(struct acpi_resource *res, void *d)
+{
+ static const unsigned long clk_scale[] = { 1, HZ_PER_KHZ, HZ_PER_MHZ };
+ struct acpi_resource_clock_input *clkres;
+ struct acpi_clk_data *data = d;
+ struct device *dev = data->dev;
+ struct clk_hw *clk;
+ unsigned long rate;
+ char name[64];
+ int err;
+
+ if (res->type == ACPI_RESOURCE_TYPE_CLOCK_INPUT) {
+ clkres = &res->data.clock_input;
+
+ if (clkres->mode) {
+ dev_warn(dev, "Only fixed rate clocks supported for now.\n");
+ return 1; /* keep going */
+ }
+
+ if (clkres->frequency_divisor == 0 || clkres->scale > 2)
+ return -EINVAL;
+
+ rate = DIV_ROUND_UP_ULL((u64)clkres->frequency_numerator * clk_scale[clkres->scale],
+ clkres->frequency_divisor);
+
+ snprintf(name, sizeof(name), "%s-%u", dev_name(dev), data->idx++);
+
+ clk = devm_clk_hw_register_fixed_rate(dev, name, NULL, 0, rate);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ err = devm_clk_hw_register_clkdev(dev, clk, name, dev_name(dev));
+ if (err)
+ return err;
+ }
+
+ return 1;
+}
+
+static void acpi_platform_init_clocks(struct acpi_device *adev)
+{
+ struct device *dev = &adev->dev;
+ struct acpi_clk_data data = { .dev = dev };
+ LIST_HEAD(list);
+ int ret;
+
+ ret = acpi_dev_get_resources(adev, &list, acpi_add_fixed_clock, &data);
+ if (ret < 0)
+ dev_err(dev, "Failed to add clock resources: %d\n", ret);
+}
+
/**
* acpi_create_platform_device - Create platform device for ACPI device node
* @adev: ACPI device node to create a platform device for.
@@ -196,6 +257,9 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev,
}
acpi_dev_free_resource_list(&resource_list);
}
+
+ if (IS_ENABLED(CONFIG_COMMON_CLK))
+ acpi_platform_init_clocks(adev);
}

memset(&pdevinfo, 0, sizeof(pdevinfo));
--
2.47.3