Re: [PATCH] arm64: dts: qcom: arduino-imola: probe the sound frontends first
From: Srinivas Kandagatla
Date: Mon Nov 16 2026 - 09:26:42 EST
On 11/14/26 12:57 PM, Igor Opaniuk wrote:
> The card probes its components in DAI link order. With the codec DMA
> backends listed first, q6routing is probed before q6asm-dai, so its
> routes from the MM_DL and MM_UL widgets (created by q6asm-dai) cannot
> be added, the component probe fails and the card is not registered:
>
> q6routing ...: ASoC: Failed to add route MM_DL1(*) -> [MultiMedia1] -> HDMI Mixer
> ...
> snd-sm8250 sound: ASoC: failed to instantiate card -19
>
> List the MultiMedia frontend links first, as the other qcom sound card
> device trees (RB5, RB2) do.
>
> Tested on the Arduino UNO Q: the card registers and a tone plays on
> the headphone path (all 11 DAPM widgets powered).
>
> Fixes: 61a95870e0f3 ("arm64: dts: qcom: arduino-imola: add support for sound")
> Signed-off-by: Igor Opaniuk <igor.opaniuk@xxxxxxxxxxxxxxxx>
> ---
> The UNO Q sound card from 61a95870e0f3 does not register as merged in
> arm64-for-7.5 (snd-sm8250 "failed to instantiate card -19"); with the
> MultiMedia links first it does.
>
> The DTB differs from the current one only in the order of the dai-link
> nodes (and the phandle numbering that follows from it); dtbs_check is
> clean before and after.
> ---
Thanks Igor for the patch, but this is just start of the problem, Once
we apply overlays the nodes will be sorted once again and we are going
to hit the same issue.
can you please try this patch:
------------------------>cut<-----------------------------