[PATCH 0/2] Add support for Samsung Galaxy Note8 (SM-N950N)
From: nhansp
Date: Mon Nov 16 2026 - 09:53:13 EST
Hi,
This series adds initial support for the Samsung Galaxy Note8
(SM-N950N), codenamed greatlte. It uses the same Exynos 8895 SoC as the
Galaxy S8 (dreamlte), which is already supported.
The device tree enables:
* simple-framebuffer
* 6GB RAM
* pstore/ramoops
* gpio-keys
This is enough to boot to a shell in an initramfs. More support will
follow.
The keys, framebuffer and ramoops region match dreamlte, but the board
gets its own file instead of a dtsi shared with it. I only have this
device, so I can't fully check how the bootloader lays out memory on
the other 8895 phones.
Like dreamlte, it boots through uniLoader [1], which sets the DECON
trigger control so that the framebuffer keeps refreshing.
dt_binding_check, dtbs_check W=1 and dt-check-style in strict and
stricter mode report nothing. On the device I booted next/dt64 with the
arm64 defconfig, plus ramoops, simpledrm and fbcon built in. All eight
CPUs come up and the kernel sees all 6GB. The console runs on the
framebuffer and all four keys report events. A panic triggered through
sysrq was still in pstore after the reboot.
The test image was flashed to the RECOVERY partition and booted from
there, with this kernel command line:
console=tty0 fbcon=font:TER16x32 clk_ignore_unused pd_ignore_unused panic=15 rdinit=/init
[1] https://github.com/ivoszbg/uniLoader
---
nhansp (2):
dt-bindings: arm: samsung: Document greatlte board binding
arm64: dts: exynos: Add initial support for Samsung Galaxy Note8
.../bindings/arm/samsung/samsung-boards.yaml | 1 +
arch/arm64/boot/dts/exynos/Makefile | 1 +
arch/arm64/boot/dts/exynos/exynos8895-greatlte.dts | 124 +++++++++++++++++++++
3 files changed, 126 insertions(+)
---
base-commit: 65ffdae53a6d522519fbd66d3cabbb4622e3e5bc
change-id: 20261116-upstream-greatlte-dts-f29792d1689a
Best regards,
--
nhansp <nhan.094.vn@xxxxxxxxx>