[PATCH v4 0/9] media: synopsys: hdmirx: support an HDMI bridge in front of the receiver

From: Sascha Hauer

Date: Mon Nov 16 2026 - 10:19:25 EST


The Synopsys HDMI receiver driver assumes the HDMI connector belongs to
it: the connector's +5V line arrives on hpd-gpios, and there is nothing
between the source and the receiver. On the board this series comes from
that is not the case. An HDMI bridge owns the connector, the receiver
sits behind it, and the two are described by an OF graph endpoint.

Three things follow from that, and the series is arranged in that order.

Patches 1-2 give the driver a media device and register the video device
as an entity with a sink pad. On their own they add a graph with one node
in it; they exist so that there is somewhere for the bridge to appear.

Patches 3-4 add the endpoint to the binding and bind the remote subdev
through a v4l2 async notifier, linking its source pad to the receiver's
sink pad. Such a board cannot provide hpd-gpios, so the binding requires
either hpd-gpios or the port. Without an endpoint in the device tree the
driver keeps working exactly as before, so boards wired straight to the
connector are unaffected.

Patch 5 is fallout from the wait for signal lock, which was bounded by an
iteration count whose duration came from the 5V debounce it called
each time round. That debounce goes away on a board with no hpd-gpios
later in the series, so the wait gets a real timeout first.

Patches 6-9 are the 5V state itself. Patch 6 stops probe requiring an
interrupt for hpd-gpios. Patch 7 makes v4l2_device_unregister_subdev()
wait for notifications already in flight. Nothing kept a subdev from
notifying a v4l2_device that was unbinding it; that is not new with this
series, as asynchronously bound subdevs sending V4L2_EVENT_SOURCE_CHANGE
race the same way today. Patch 8 adds V4L2_DEVICE_NOTIFY_RX_POWER_PRESENT,
and patch 9 has the receiver set v4l2_dev.notify and take the state from
whatever is bound in front of it. The notification is only an edge, as
the 5V interrupt is with hpd-gpios: the hotplug worker then asks the
subdev through g_input_status(), so nothing is cached that could go
stale against bind or unbind. Without a det_irq there is nothing to
disable across suspend and remove either, so patch 9 disables the
hotplug work items themselves instead of cancelling them. Patch 7 is
what lets the notify callback read sd->v4l2_dev while the subdev is
being unbound.

V4L2_CID_DV_RX_POWER_PRESENT is otherwise the only place this state is
published - adv7604, adv7842, tc358743 and tda1997x all set that control
from their cable detect interrupt and stop there - while a format change
already gets an in-kernel notification through v4l2_subdev_notify_event().
An earlier version of this series hooked the control with
v4l2_ctrl_notify() instead. That reaches into another device's control
handler, and the only thing it bought was working with those four
drivers unmodified, which turns out to be worth nothing: they are HDMI
sinks, so none of them could sit in front of an HDMI receiver anyway.

Nothing in tree sends the new notification yet. The driver for the device
on this board does, and the alternative was a mechanism that no in-tree
driver could have used either.

There is no in-tree device tree using the new port yet: the board is not
upstream, and the device in front of the receiver, a Lontium LT86102UXE
1:2 HDMI splitter, has no driver upstream either. I would rather send the
infrastructure for review now than sit on it until the board lands.

The series is based on media next with "media: synopsys: hdmirx: move
the reset bulk data out of the driver data" applied, a fix for the patch
that led v3 of this series and is in next now:

https://lore.kernel.org/all/20261116-hdmirx-resets-uaf-v1-1-1903146a3118@xxxxxxxxxxxxxx/

Build tested for arm64 at each patch with W=1. Tested on that board on
v7.4-rc1 plus the board support, with the hdmirx driver, its binding and
v4l2-subdev.h identical to this series. v4l2-compliance from v4l-utils
git (d2e89246cefc), with the LT86102UXE in front of the receiver and a
source connected:

v4l2-compliance 1.33.0-5524, 64 bits, 64-bit time_t
v4l2-compliance SHA: d2e89246cefc 2026-10-30 13:45:36

Compliance test for snps_hdmirx device /dev/media2:

Media Driver Info:
Driver name : snps_hdmirx
Model : snps-hdmirx
Serial :
Bus info : platform:fdee0000.hdmi_receiver
Media version : 7.4.0
Hardware revision: 0x00000000 (0)
Driver version : 7.4.0

Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
test invalid ioctls: OK

Allow for multiple opens:
test second /dev/media2 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK

Media Controller ioctls:
test MEDIA_IOC_G_TOPOLOGY: OK
Entities: 2 Interfaces: 2 Pads: 3 Links: 3
test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
test MEDIA_IOC_SETUP_LINK: OK

Total for snps_hdmirx device /dev/media2: 8, Succeeded: 8, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for snps_hdmirx device /dev/video13:

Driver Info:
Driver name : snps_hdmirx
Card type : snps_hdmirx
Bus info : platform:fdee0000.hdmi_receiver
Driver version : 7.4.0
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : snps_hdmirx
Model : snps-hdmirx
Serial :
Bus info : platform:fdee0000.hdmi_receiver
Media version : 7.4.0
Hardware revision: 0x00000000 (0)
Driver version : 7.4.0
Interface Info:
ID : 0x03000003
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : stream_hdmirx
Function : V4L2 I/O
Pad 0x01000002 : 0: Sink
Link 0x02000008: from remote pad 0x1000007 of entity 'lt86102uxe 7-0038' (Video Interface Bridge): Data, Enabled, Immutable

Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK

Allow for multiple opens:
test second /dev/video13 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK

Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK
test VIDIOC_LOG_STATUS: OK

Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0

Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
test VIDIOC_DV_TIMINGS_CAP: OK
test VIDIOC_G/S_EDID: OK

Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 5 Private Controls: 3

Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)

Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
test blocking wait: OK

Test input 0:

Streaming ioctls:
test read/write: OK (Not Supported)
test MMAP (no poll, REQBUFS): OK
test MMAP (select, REQBUFS): OK
test MMAP (epoll, REQBUFS): OK
test MMAP (no poll, CREATE_BUFS): OK
test MMAP (select, CREATE_BUFS): OK
test MMAP (epoll, CREATE_BUFS): OK
test USERPTR (no poll): OK (Not Supported)
test USERPTR (select): OK (Not Supported)
warn: v4l2-test-buffers.cpp(2223): Cannot test DMABUF, specify --expbuf-device
test DMABUF (no poll): OK (Not Supported)
test DMABUF (select): OK (Not Supported)

Total for snps_hdmirx device /dev/video13: 60, Succeeded: 60, Failed: 0, Warnings: 1
--------------------------------------------------------------------------------
Compliance test for snps_hdmirx device /dev/v4l-subdev0:

Driver Info:
Driver version : 7.4.0
Capabilities : 0x00000000
Client Capabilities: 0x0000000000000002
interval-uses-which Media Driver Info:
Driver name : snps_hdmirx
Model : snps-hdmirx
Serial :
Bus info : platform:fdee0000.hdmi_receiver
Media version : 7.4.0
Hardware revision: 0x00000000 (0)
Driver version : 7.4.0
Interface Info:
ID : 0x0300000a
Type : V4L Sub-Device
Entity Info:
ID : 0x00000005 (5)
Name : lt86102uxe 7-0038
Function : Video Interface Bridge
Pad 0x01000006 : 0: Sink
Pad 0x01000007 : 1: Source
Link 0x02000008: to remote pad 0x1000002 of entity 'stream_hdmirx' (V4L2 I/O): Data, Enabled, Immutable

Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK

Allow for multiple opens:
test second /dev/v4l-subdev0 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK

Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)

Sub-Device ioctls (Sink Pad 0):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)

Sub-Device ioctls (Source Pad 1):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)

Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 3 Private Controls: 3

Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)

Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
test blocking wait: OK (Not Supported)

Total for snps_hdmirx device /dev/v4l-subdev0: 61, Succeeded: 61, Failed: 0, Warnings: 0

Grand Total for snps_hdmirx device /dev/media2: 129, Succeeded: 129, Failed: 0, Warnings: 1

The series was developed with the help of an AI coding assistant.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
Changes in v4:
- drop "free the driver data when the last user is gone", Hans applied
it from v3.
- rebase onto media next
- commit messages: the driver data is no longer devm allocated
- move the Assisted-by trailers into this cover letter
- add v4l2-compliance output (Hans)
- pick up Acked-by from Dmitry
- Link to v3: https://lore.kernel.org/r/20261005-hdmirx-media-v3-0-71a11a2e3e76@xxxxxxxxxxxxxx

Changes in v3:
- new patch 1: free the driver data from the v4l2_device release callback
instead of devres, an open file descriptor keeps the video device alive
past unbind. The media device cleanup Sashiko flagged on the old patch
1 was the same problem, which predates the series (Sashiko on patch 1)
- v4l2-device: wait for the SRCU grace period on every subdev
unregistration, not only when the v4l2_device has a notify callback,
as the reader dereferences v4l2_dev either way (Sashiko on patch 7)
- Link to v2: https://lore.kernel.org/r/20260924-hdmirx-media-v2-0-c12f641d8b0f@xxxxxxxxxxxxxx

Changes in v2:
- dt-bindings: squash "add the source port" and "make hpd-gpios optional"
into one patch and require exactly one of hpd-gpios and port (Conor)
- dt-bindings: drop the OS-specific sentence from the port description
(Conor)
- hdmirx: take graph_mutex around media_create_pad_link() in the async
bound callback, the media device is already registered (Sashiko)
- new patch 7: v4l2-device: wait for notifications when unregistering a
subdev, so a notification cannot outlive the unbind of the receiver
(Sashiko on patch 9)
- hdmirx: ask the subdev in front for the 5V state on every notification
instead of caching what the notification carries, and disable the
hotplug work items across probe, suspend and remove instead of gating
the workers on a flag and cancelling once more after the notifier is
unregistered
- Link to v1: https://lore.kernel.org/r/20260923-hdmirx-media-v1-0-ea3d77d4a5f3@xxxxxxxxxxxxxx

---
Gerald Loacker (6):
media: synopsys: hdmirx: add media device infrastructure
media: synopsys: hdmirx: add media entity for video capture device
media: synopsys: hdmirx: add async subdevice support
media: synopsys: hdmirx: give the signal lock wait a real timeout
media: synopsys: hdmirx: skip the 5V detect interrupt without a GPIO
media: synopsys: hdmirx: get the 5V state from the upstream subdev

Sascha Hauer (3):
dt-bindings: media: snps,dw-hdmi-rx: add a port for a bridge in front
media: v4l2-device: wait for notifications when unregistering a subdev
media: v4l2-subdev: notify the bridge when the source power changes

.../devicetree/bindings/media/snps,dw-hdmi-rx.yaml | 21 +-
Documentation/driver-api/media/v4l2-subdev.rst | 8 +-
drivers/media/platform/synopsys/hdmirx/Kconfig | 1 +
.../media/platform/synopsys/hdmirx/snps_hdmirx.c | 304 ++++++++++++++++++---
drivers/media/v4l2-core/v4l2-device.c | 42 +++
include/media/v4l2-device.h | 15 +-
include/media/v4l2-subdev.h | 12 +
7 files changed, 355 insertions(+), 48 deletions(-)
---
base-commit: 48fe5a7834cc10081887d7bcd9ff0a4cadc3fa8c
change-id: 20260904-hdmirx-media-fe7eb952b2be
prerequisite-change-id: 20261116-hdmirx-resets-uaf-d6792101954b:v1
prerequisite-patch-id: 72d3c6f730c052b1becdc7e253c8f75dda38fbea

Best regards,
--
Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>