[PATCH net-next v2 0/4] net: phy: marvell: add RGMII-to-Copper mode configuration
From: Paul Louvel
Date: Mon Nov 16 2026 - 10:27:59 EST
Hi,
This series add the configuration of the RGMII-to-Copper MAC interface
for Marvell 88E1510/88E1518/88E1512/88E1514 PHYs.
Patch #1, #2, #3 are cleanup commits.
Signed-off-by: Paul Louvel (Schneider Electric) <paul.louvel@xxxxxxxxxxx>
---
Changes in v2:
- Reword patches to be more accurate.
- Added a patch to deduplicate the mode setting code in
m88e1510_config_init(), as suggested by Marek.
- When setting RGMII system interface, avoid erasing existing mode that
uses RGMII but a different media interface. This issue was raised by
Sashiko.
- Added a patch to rework the EEE errata code by using
phy_select_page() and phy_restore_page(), avoiding useless bus lock.
- Link to v1: https://patch.msgid.link/20261109-marvell-phy-rgmii-v1-0-026979ef4f13@xxxxxxxxxxx
---
Paul Louvel (4):
net: phy: marvell: move mode configuration into standalone function
net: phy: marvell: de-duplicate mode initialization code
net: phy: marvell: factor out EEE errata initialization
net: phy: marvell: add RGMII-to-Copper mode configuration
drivers/net/phy/marvell.c | 127 ++++++++++++++++++++++++++--------------------
1 file changed, 71 insertions(+), 56 deletions(-)
---
base-commit: 7b6ab4dbc156e2f96419715130b3d5738a306c93
change-id: 20261109-marvell-phy-rgmii-60a8bf619582
Best regards,
--
Paul Louvel, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com