[PATCH 1/2] mtd: spinand: gigadevice: add support for GD5F4GM7UExxG

From: Angelo Compagnucci

Date: Mon Nov 16 2026 - 10:33:02 EST


Add the GigaDevice GD5F4GM7UExxG. It is a 4Gbit 3.3V SPI NAND with
4096 byte pages and 256 byte OOB.

The ECC status works like on the GD5F4GM8. With ECC enabled, only the
first 128 OOB bytes are free. The other 128 hold the ECC parity, like
on the GD5F4GQ4xC. The Quad IO read needs two dummy bytes, like on the
GD5F1GQ5.

The values come from the GigaDevice datasheet DS-01326, Rev 1.0.

Tested on an STM32MP133 board with UBI and UBIFS.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>
---
drivers/mtd/nand/spi/gigadevice.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index a6d6d6e0c..990f2d271 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -564,6 +564,16 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
gd5fxgq4uexxg_ecc_get_status)),
+ SPINAND_INFO("GD5F4GM7UExxG",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x94),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&gd5fxgq4xc_oob_256_ops,
+ gd5fxgq4uexxg_ecc_get_status)),
SPINAND_INFO("GD5F4GM8UExxG",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x95),
NAND_MEMORG(1, 2048, 128, 64, 4096, 80, 1, 1, 1),
--
2.53.0