[RFC PATCH 0/2] ALSA: usb-audio: working hardware volume for XiiSound headsets (040b:0897)

From: Pavel Artemev

Date: Mon Nov 16 2026 - 10:35:57 EST


During a two-week campaign to make a Temple (XiiSound/Weltrend
040b:0897) wireless dongle audible I captured the complete control
traffic of the device on both Linux (usbmon) and the vendor's own
Windows 10 stack (USBPcap). This cover letter summarizes what the
wire says about this chipset, because it differs from the device model
encoded in the recently merged workaround, commit ba9bccdf711a
("ALSA: usb-audio: Skip broken playback feature unit on XiiSound
chips"), which is queued for 7.5.

To be clear up front: that commit fixes the user-visible bug (the
dongle coming up silent or one-eared), nothing here is a regression
report against it, and this RFC is not asking for its immediate
removal. It proposes the alternative I ended up running locally -
keep the playback feature unit exposed and make its hardware volume
work - and offers the captures as evidence, both for this design
discussion and for whoever debugs these devices next.

What the wire shows
===================

1. The playback feature unit is a working hardware volume. Per-
channel SET_CUR writes apply deterministically and independently
(a fast pair CN1<-50 + CN2<-100 applies exactly; a lone channel
write does not disturb its sibling), the master gates both ears
symmetrically, and intermediate values are audible and graded.
The vendor's Windows driver drives this exact unit on every slider
and hardware-button step, mapped linearly from its slider percent
(10% -> raw 9, 50% -> raw 49), and every intermediate value is
audible there too.

2. The "any volume below the maximum mutes one or both channels"
behaviour that motivated the skip is host-side, in three stacked
layers:

- the unit advertises a bogus 0.00..0.39 dB range, under which
every user-space volume at or below 0 dB - the whole normal
PipeWire range, 100% included - resolves to the raw minimum,
which does silence the channel;
- the stereo control's GET_CUR returns a constant value, so the
sticky-GET sanity check classifies it broken and the probe
writes the minimum to both channels at every mixer build;
- user space applies one logical volume change as fragmented
writes (one per channel, the first carrying the stale sibling
value), and the device silently drops control writes in the
first seconds after enumeration (measured: the window closes
6.5-9 s after enumeration, with a ragged tail), so a stale
channel can survive until some later write happens to refresh
it. The per-ear asymmetry users report is exactly this stale
state, not a channel-mapping property: under wire-verified
canonical writes the attenuation is symmetric (12/12 steps).

3. The Windows driver never reads back (GET_CUR is broken, so it
cannot), and does not need to: it keeps the whole channel picture
at a single source of truth, writes every channel of a control in
one short burst - master first - and re-pushes the complete state
at every device open. That every-open re-push is what repairs
whatever the enumeration window swallowed.

One consequence worth recording: the create-time pin writes of the
merged quirk sit inside the loss window and are dropped along with
every other early write. The dongle still comes up audible because
it powers up with every volume channel at the maximum - which is what
the pin intended to enforce anyway - and the resume re-pin added in
its v3 is the part that does real work. So the merged fix is sound
in effect; only its description of the hardware is not.

The RFC
=======

Patch 1 replaces the skip-and-pin with three quirk flags for
040b:0897: the new QUIRK_FLAG_MIXER_INIT_VOLUME_MAX (initialize all
channels of every volume control to the maximum at mixer creation,
superseding the probe-time minimum writes) plus the existing
PLAYBACK/CAPTURE LINEAR_VOL flags (linear scale instead of the bogus
dB range). Hardware volume then behaves like on Windows.

Patch 2 adds QUIRK_FLAG_MIXER_STATE_REPUSH, which replicates the
vendor's write discipline for write-lossy devices: puts only record
values, one deferred flush writes each touched feature unit in a
single canonical burst (master first, derived from the loudest
channel), and every PCM stream open re-pushes the full cached state -
the every-open repair the Windows stack relies on. This is new
mechanism territory (I found no prior proposal for write batching or
re-push in the archives), hence RFC.

Both ran as locally built DKMS modules (7.2 tree, the port here is to
current sound.git master) through wire-verified end-to-end rounds -
replug, suspend/resume, balance, mute, rapid gestures during playback
- and in daily use; details in the commit messages.

Known limitations, stated for the record:

- Through the linear scale PipeWire applies its cubic, so the
mid-slider feel is quieter than on Windows (50% -> raw ~12).
Users who want the vendor loudness feel can set
api.alsa.soft-mixer = true - which is effectively what the merged
skip approach gives everyone. The value of this RFC is that the
choice stays with the user and the hardware volume keeps working
for stacks that do drive it.
- After a replug the device sits at its power-up state (maximum)
until the first write lands past the loss window; with patch 2 a
stream open re-pushes and heals, provided streams actually open
and close (a wedged PipeWire session that holds the device open
indefinitely defers the heal to the first user volume gesture).
- Hardware buttons keep stepping an internal device state that the
host cannot observe (no readback); neither approach - skip or
drive - syncs with the buttons.

I am happy to rework or drop either patch; the capture evidence is
offered independently of the design preference.

Pavel Artemev (2):
ALSA: usb-audio: drive XiiSound playback volume instead of skipping it
ALSA: usb-audio: add MIXER_STATE_REPUSH quirk flag

Documentation/sound/alsa-configuration.rst | 9 +
sound/usb/mixer.c | 286 +++++++++++++++++++-
sound/usb/mixer.h | 10 +
sound/usb/mixer_maps.c | 19 -
sound/usb/mixer_quirks.c | 99 ++++------
sound/usb/pcm.c | 4 +
sound/usb/quirks.c | 7 +
sound/usb/usbaudio.h | 27 ++
8 files changed, 376 insertions(+), 85 deletions(-)

base-commit: f930156051f6a3dcd454ff723ca36b14d49650d2
--
2.56.1