[PATCH] uprobes/x86: Fix bypass of two-byte opcode validation
From: Pablo Fraile Alonso
Date: Mon Nov 16 2026 - 10:40:33 EST
Commit 67fc809217dc ("uprobes/x86: Fix 1-byte opcode tables") set
bit 0x0f in both good_insns_32 and good_insns_64, assuming that
the opcode escape byte would not be reported by OPCODE1(insn).
However, unlike ordinary instruction prefixes, 0x0f is an opcode
escape byte retained in insn->opcode.bytes[0] by the x86 instruction
decoder. Subsequent opcode bytes are stored in the following positions.
For example, SYSCALL (0F 05) is decoded as:
insn->opcode.bytes[0] = 0x0f;
insn->opcode.bytes[1] = 0x05;
Consequently, OPCODE1(insn) returns 0x0f, causing the first
test_bit() in uprobe_init_insn() to succeed and return 0 before
good_2byte_insns is consulted.
This bypasses the secondary opcode allowlist for all legacy
two-byte instructions, including SYSCALL (0F 05), which is
explicitly disallowed by good_2byte_insns.
Three-byte opcodes (0F 38 and 0F 3A) are also affected by the
early return, since their decoded opcodes begin with 0x0f.
Fix the validation logic so that legacy two-byte instructions
are checked against good_2byte_insns. Preserve the existing
behavior for three-byte opcodes, which are not currently checked
against a dedicated allowlist (in my opinion, this should be
audited on another patch, instead of returning -ENOTSUPP).
Fixes: 67fc809217dc ("uprobes/x86: Fix 1-byte opcode tables")
Signed-off-by: Pablo Fraile Alonso <pablo@xxxxxxxxxxxxxxx>
---
I created two reproducers (and a brief explanation of them). One it's a simple one that demonstrates what I told (that you can attach to a non-allowed instruction), an another one that freezes a system by attaching a "poisoned" uprobe to glibc.
- Dummy: https://gist.github.com/Pablito2020/077fc8d8b6d7a75c23c702c7021d68e6
- Poisoned Glibc: https://gist.github.com/Pablito2020/bdda586ab023ec4760716b3be7cff102
After the fix, registration of the uprobe should fail because
the instruction is rejected by the secondary opcode bitmap.
---
arch/x86/kernel/uprobes.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 0f60c0d076b6..1cf901d18688 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -292,14 +292,24 @@ static int uprobe_init_insn(struct arch_uprobe *auprobe, struct insn *insn)
else
good_insns = good_insns_32;
- if (test_bit(OPCODE1(insn), (unsigned long *)good_insns))
- return 0;
-
- if (insn->opcode.nbytes == 2) {
+ switch (insn->opcode.nbytes) {
+ case 1:
+ if (test_bit(OPCODE1(insn), (unsigned long *)good_insns))
+ return 0;
+ break;
+ case 2:
if (test_bit(OPCODE2(insn), (unsigned long *)good_2byte_insns))
return 0;
+ break;
+ case 3:
+ /*
+ * As of today, allow three-byte opcodes, although
+ * one day we should investigate which instructions may
+ * not be compatible with XOL and reject specific
+ * problematic encodings.
+ */
+ return 0;
}
-
return -ENOTSUPP;
}
---
base-commit: aebb7274476403040d582c61478df8f4a7bf9cd3
change-id: 20261116-x86-uprobes-two-byte-opcode-7fa743830931
Best regards,
--
Pablo Fraile Alonso <pablo@xxxxxxxxxxxxxxx>