Re: [PATCH 0/2] arm64: dts: allwinner: h6: Enable Ethernet on Tanix TX6

From: Chen-Yu Tsai

Date: Mon Nov 16 2026 - 11:30:52 EST


On Sun, 15 Nov 2026 18:11:46 +0100, Jernej Skrabec wrote:
> The AC200 MFD and Ethernet PHY drivers and their bindings were merged
> in v7.4-rc1. This series adds the device tree parts needed to use them
> on H6, starting with the Tanix TX6 and TX6 mini TV boxes, whose only
> Ethernet port goes through the PHY in the AC200 co-packaged with the
> H6.
>
> Patch 1 describes the AC200 in the H6 dtsi: the I2C3 controller with
> the AC200 on it, a pwm-clock that provides its 24 MHz reference clock
> from PWM1, the RMII pins and the EPHY calibration value in the SID.
> Everything stays disabled.
>
> [...]

Applied to sunxi/dt-for-7.5 in sunxi, thanks!

[1/2] arm64: dts: allwinner: sun50i-h6: Add AC200 companion chip
https://git.kernel.org/sunxi/linux/c/16272a829005
[2/2] arm64: dts: allwinner: tanix: Enable Ethernet
https://git.kernel.org/sunxi/linux/c/836398c4e1f2

Best regards,
--
Chen-Yu Tsai <wens@xxxxxxxxxx>