[PATCH v2 2/3] PCI: Avoid runtime D3 on Amazon PCIe switch ports

From: Aviv Bakal

Date: Mon Nov 16 2026 - 11:51:38 EST


The PCIe switch ports on AWS instances (vendor 0x1d0f) advertise PME
from D3hot but do not send it. Since commit d4c79b63d82d ("PCI: Allow
D3 for native hotplug-capable Root Ports on non-x86 platforms") these
ports runtime suspend to D3hot on non-x86 platforms, and hotplug events
such as an ENI attach are lost.

Mark them PCI_DEV_FLAGS_NO_D3, reusing quirk_no_ata_d3() renamed to
quirk_no_d3().

Fixes: d4c79b63d82d ("PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms")
Cc: stable@xxxxxxxxxxxxxxx # 7.3.x
Co-developed-by: Zeev Zilberman <zeev@xxxxxxxxxx>
Signed-off-by: Zeev Zilberman <zeev@xxxxxxxxxx>
Signed-off-by: Aviv Bakal <avivb@xxxxxxxxxx>
---
drivers/pci/quirks.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7f1f47ea2ee4..338e884126fb 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1458,23 +1458,31 @@ static void quirk_ide_samemode(struct pci_dev *pdev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);

-/* Some ATA devices break if put into D3 */
-static void quirk_no_ata_d3(struct pci_dev *pdev)
+/* Some devices break if put into D3 */
+static void quirk_no_d3(struct pci_dev *pdev)
{
pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
}
/* Quirk the legacy ATA devices only. The AHCI ones are ok */
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID,
- PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_d3);
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
- PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_d3);
/* ALi loses some register settings that we cannot then restore */
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID,
- PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_d3);
/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
occur when mode detecting */
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
- PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_d3);
+
+/*
+ * Amazon 1d0f PCIe switch ports (e.g. 1d0f:cec2) on AWS instances
+ * advertise PME# from D3hot but never assert it, so hotplug events on
+ * a port in D3 are lost.
+ */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMAZON, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_PCI, 8, quirk_no_d3);

/*
* This was originally an Alpha-specific thing, but it really fits here.
--
2.50.1