[PATCH v5 11/12] arm64: dts: qcom: sm6350-lena: Add PM6150L thermals
From: erebion
Date: Mon Nov 16 2026 - 17:50:53 EST
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
CAM_FLASH_THERM and QUIET_THERM thermistors connected to
PM6150L.
Due to hardware constraints we can only register 4 zones with
pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.
RFC_CAM_THERM is intentionally omitted for now and will have to be
added once it is clear how it should be added.
The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.
Signed-off-by: erebion <erebion@xxxxxxxxxx>
---
.../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 160 +++++++++++++++++++++
1 file changed, 160 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index b86fe11fd5296..b19e76b3c1a75 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -81,6 +81,13 @@ memory@fe901000 {
};
};
+ msm_therm_sensor: thermal-sensor-msm {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
+ io-channel-names = "sensor-channel";
+ };
+
thermal-zones {
chg-skin-thermal {
thermal-sensors = <&pm7250b_adc_tm 0>;
@@ -106,6 +113,74 @@ active-config0 {
};
};
+ pa0-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pa1-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ quiet-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rfc-flash-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ sdm-skin-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&msm_therm_sensor>;
+
+ trips {
+ trip0 {
+ temperature = <45000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <55000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
xo-thermal {
thermal-sensors = <&pmk8350_adc_tm 0>;
@@ -392,6 +467,83 @@ &mpss {
status = "okay";
};
+&pm6150l_adc {
+ pinctrl-0 = <&pm6150l_adc_default>;
+ pinctrl-names = "default";
+
+ channel@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ label = "pa_therm1";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ label = "msm_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ label = "pa_therm0";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@54 {
+ reg = <ADC5_GPIO3_100K_PU>;
+ label = "rear_cam_flash_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@55 {
+ reg = <ADC5_GPIO4_100K_PU>;
+ label = "quiet_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+};
+
+&pm6150l_adc_tm {
+ status = "okay";
+
+ pa-therm1@0 {
+ reg = <0>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ pa-therm0@1 {
+ reg = <1>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ rear-cam-flash-therm@2 {
+ reg = <2>;
+ io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ quiet-therm@3 {
+ reg = <3>;
+ io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+};
+
&pm6150l_flash {
status = "okay";
@@ -405,6 +557,14 @@ led-0 {
};
};
+&pm6150l_gpios {
+ pm6150l_adc_default: adc-default-state {
+ pins = "gpio7", "gpio10";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-high-impedance;
+ };
+};
+
&pm6350_gpios {
vol_down_n: vol-down-n-state {
pins = "gpio2";
--
2.53.0