Re: [PATCH v7 5/5] iommu/of: Add support for "iommu-ranges" on a device node
From: Vishnu Reddy
Date: Tue Nov 17 2026 - 00:28:57 EST
On 11/13/2026 3:06 PM, Yijie Yang wrote:
>
>
> On 11/7/2026 1:14 AM, Vikash Garodia wrote:
>> Reserving an IOVA address using "iommu-addresses" requires it to be
>> placed in the reserved-memory node. But when "iommu-addresses" is the
>> only property being described and there is no backing "reg" (i.e. no
>> actual reserved system memory), it does not really belong under
>> /reserved-memory. A device IOVA range is specific to its own address
>> space, and does not describe the system physical memory to make it
>> qualify under reserved-memory. Given this, place "iommu-addresses"
>> inside reserved-memory only when it is paired with a "reg", otherwise,
>> define it within the device own node. It was discussed here:
>> https://lore.kernel.org/all/662f7093-fb0a-4564-9ca0-98e03e68ba9a@xxxxxxxxxx
>>
>> Existing "iommu-addresses" property expects a phandle, which does
>> not make sense when the property is defined within the device node.
>> "iommu-ranges" was introduced to specify the device specific IOVA ranges
>> when there is no backing "reg".
>>
>> Suggested-by: Rob Herring <robh@xxxxxxxxxx>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
>> Co-developed-by: Vishnu Reddy <busanna.reddy@xxxxxxxxxxxxxxxx>
>> Signed-off-by: Vishnu Reddy <busanna.reddy@xxxxxxxxxxxxxxxx>
>> Signed-off-by: Vikash Garodia <vikash.garodia@xxxxxxxxxxxxxxxx>
>> ---
>> drivers/iommu/of_iommu.c | 107 +++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 107 insertions(+)
>>
>> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
>> index
>> 00b02c19f27e195fc36c4bc1d91253255147c9ab..e133d3b346feecac7e2bfaec44e4882060ee89ec
>> 100644
>> --- a/drivers/iommu/of_iommu.c
>> +++ b/drivers/iommu/of_iommu.c
>> @@ -183,6 +183,111 @@ iommu_resv_region_get_type(struct device *dev,
>> return IOMMU_RESV_RESERVED;
>> }
>> +/**
>> + * of_iommu_derive_resv_regions - derive reserved regions which
>> + * are outside of iommu-ranges
>> + * @dev: device for which to get reserved regions
>> + * @list: reserved region list
>> + *
>> + * A device can describe its own usable IOVA ranges directly on its node
>> + * via "iommu-ranges". Everything not under those ranges is derived
>> + * as a reserved region so the IOMMU allocator won't use it. Entries may
>> + * appear in any order in the property.
>> + */
>> +static void of_iommu_derive_resv_regions(struct device *dev, struct
>> list_head *list)
>> +{
>> + struct of_iommu_range {
>> + struct list_head node;
>> + phys_addr_t start;
>> + phys_addr_t end;
>> + } *pos, *new, *next_range;
>> + int size, prot = IOMMU_READ | IOMMU_WRITE;
>> + struct iommu_resv_region *region;
>> + const __be32 *maps, *end;
>> + struct list_head *prev;
>> + phys_addr_t next = 0;
>> + LIST_HEAD(ranges);
>> +
>> + maps = of_get_property(dev->of_node, "iommu-ranges", &size);
>> + if (!maps)
>> + return;
>> +
>> + end = maps + size / sizeof(__be32);
>> +
>> + while (maps < end) {
>> + phys_addr_t iova, iova_end;
>> + resource_size_t length;
>> +
>> + maps = of_translate_dma_region(dev->of_node, maps, &iova, &length);
>> + if (!maps) {
>> + dev_err(dev, "%pOF: failed to parse iommu-ranges\n",
>> + dev->of_node);
>> + goto exit;
>> + }
>> +
>> + if (!length)
>> + continue;
>> +
>> + iova_end = iova + length - 1;
>> +
>> + if (iova_end < iova) {
>> + dev_err(dev, "%pOF: iommu-ranges overflows address space\n",
>> + dev->of_node);
>> + goto exit;
>> + }
>> +
>> + prev = &ranges;
>> + list_for_each_entry(pos, &ranges, node) {
>> + if (pos->start > iova)
>> + break;
>> + prev = &pos->node;
>> + }
>> +
>> + new = kmalloc_obj(*new);
>> + if (!new)
>> + goto exit;
>> +
>> + new->start = iova;
>> + new->end = iova_end;
>> + list_add(&new->node, prev);
>> + }
>> +
>> + if (list_empty(&ranges))
>> + return;
>> +
>> + if (of_dma_is_coherent(dev->of_node))
>> + prot |= IOMMU_CACHE;
>> +
>> + list_for_each_entry_safe(pos, next_range, &ranges, node) {
>> + if (pos->start > next) {
>> + region = iommu_alloc_resv_region(next, pos->start - next, prot,
>> + IOMMU_RESV_RESERVED, GFP_KERNEL);
>> + if (region)
>> + list_add_tail(®ion->list, list);
>
> Why keep looping here after allocation failure?
This matches the existing "iommu-addresses" handling. We continue after an
allocation failure since later allocations may still succeed, preserving as
many DT-specified restrictions as possible.
>
>> + }
>> +
>> + if (pos->end >= PHYS_ADDR_MAX - 1)
>> + goto exit;
>> +
>> + if (pos->end >= next)
>> + next = pos->end + 1;
>> +
>> + list_del(&pos->node);
>> + kfree(pos);
>> + }
>> +
>> + region = iommu_alloc_resv_region(next, PHYS_ADDR_MAX - next,
>> + prot, IOMMU_RESV_RESERVED, GFP_KERNEL);
>> + if (region)
>> + list_add_tail(®ion->list, list);
>> +
>> +exit:
>> + list_for_each_entry_safe(pos, next_range, &ranges, node) {
>> + list_del(&pos->node);
>> + kfree(pos);
>> + }
>> +}
>> +
>> /**
>> * of_iommu_get_resv_regions - reserved region driver helper for device tree
>> * @dev: device for which to get reserved regions
>> @@ -262,5 +367,7 @@ void of_iommu_get_resv_regions(struct device *dev, struct
>> list_head *list)
>> }
>> }
>> }
>> +
>> + of_iommu_derive_resv_regions(dev, list);
>> }
>> EXPORT_SYMBOL(of_iommu_get_resv_regions);
>>
>