[PATCH 0/4] Add Nuvoton MA35D1 thermal sensor support

From: Zi-Yu Chen

Date: Tue Nov 17 2026 - 01:06:06 EST


This series adds support for the on-chip temperature sensor of the
Nuvoton MA35D1 SoC.

The sensor has no register region of its own; it is controlled through
a single register in the system management (SYS) block, which is
already described in DT and bound to the MA35D1 reset driver. Rather
than adding a child node that would only exist to instantiate a driver,
the SYS node is made the thermal sensor provider, and the reset driver
creates an auxiliary device that the thermal driver binds to.

Patch 1 documents #thermal-sensor-cells for the SYS node, patch 2 makes
the reset driver create the auxiliary device, patch 3 adds the thermal
driver and patch 4 adds the thermal zone to the SoC dtsi.

Tested on the MA35D1-SOM board.

Zi-Yu Chen (4):
dt-bindings: reset: nuvoton,ma35d1-reset: Add #thermal-sensor-cells
reset: ma35d1: Register auxiliary device for the temperature sensor
thermal/drivers/ma35d1: Add Nuvoton MA35D1 thermal sensor driver
arm64: dts: nuvoton: ma35d1: Add thermal zone

.../bindings/reset/nuvoton,ma35d1-reset.yaml | 13 +-
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 16 ++
drivers/reset/Kconfig | 1 +
drivers/reset/reset-ma35d1.c | 11 +-
drivers/thermal/Kconfig | 11 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/ma35d1_thermal.c | 149 ++++++++++++++++++
7 files changed, 198 insertions(+), 4 deletions(-)
create mode 100644 drivers/thermal/ma35d1_thermal.c

--
2.34.1