[PATCH 2/3] dt-bindings: iio: pressure: infineon,dps310: Add Goermicro SPL07-003
From: Jorijn van der Graaf
Date: Tue Nov 17 2026 - 03:41:48 EST
The Goermicro SPL07-003 is register compatible with the DPS310, but has
two more pressure calibration coefficients, and bit 7 of TMP_CFG is a
rate bit where the DPS310 selects its temperature sensor.
So the DPS310 compatible cannot be a fallback. The ZTS8032 compatible
cannot be one either: the ZTS8032 has the two coefficients as 16 bit
values in four bytes, the SPL07-003 as 12 bit values in three.
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@xxxxxxxxxxxxx>
---
.../devicetree/bindings/iio/pressure/infineon,dps310.yaml | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
index 416117dfd927..46f0892a75fb 100644
--- a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
@@ -11,12 +11,13 @@ maintainers:
description:
The DPS310 is a barometric pressure and temperature sensor with an I2C
- interface. The Zilltek ZTS8032 is register compatible with it, but has
- additional calibration coefficients.
+ interface. The Goermicro SPL07-003 and the Zilltek ZTS8032 are register
+ compatible with it, but have additional calibration coefficients.
properties:
compatible:
enum:
+ - goermicro,spl07-003
- infineon,dps310
- zilltek,zts8032
--
2.56.0