[PATCH v2 2/2] riscv: dts: spacemit: Add K3 CoM260 TQ support
From: Troy Mitchell
Date: Tue Nov 17 2026 - 03:49:34 EST
Add a device tree for the K3 CoM260 TQ board, a K3 CoM260 module on the
TQ carrier board. It reuses the CoM260 module description for the UART
console, Ethernet, module EEPROM and PMIC.
Describe the carrier's green and yellow Ethernet PHY LEDs while keeping
their existing hardware state, and enable ALDPS power saving on the
RTL8211F PHY with its unused CLKOUT output disabled.
The TQ carrier board is built with one of two power schemes for the CPU
clusters. The bootloader programs those regulators and Linux keeps the
voltages it leaves, so this description covers both variants. Once the
regulators are supported, the power schemes can be described as
overlays and applied to this device tree at build time.
Signed-off-by: Troy Mitchell <troy.mitchell@xxxxxxxxxxxxxxxxxx>
---
arch/riscv/boot/dts/spacemit/Makefile | 1 +
arch/riscv/boot/dts/spacemit/k3-com260-tq.dts | 44 +++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
index 851b701e5da4..bac9dcb5efe5 100644
--- a/arch/riscv/boot/dts/spacemit/Makefile
+++ b/arch/riscv/boot/dts/spacemit/Makefile
@@ -6,5 +6,6 @@ dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-r2s.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-com260-ifx.dtb
+dtb-$(CONFIG_ARCH_SPACEMIT) += k3-com260-tq.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-deepcomputing-fml13v05.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-pico-itx.dtb
diff --git a/arch/riscv/boot/dts/spacemit/k3-com260-tq.dts b/arch/riscv/boot/dts/spacemit/k3-com260-tq.dts
new file mode 100644
index 000000000000..758347f30b3c
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/k3-com260-tq.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2026 SpacemiT (Hangzhou) Technology Co. Ltd */
+
+#include <dt-bindings/leds/common.h>
+
+#include "k3-com260.dtsi"
+
+/ {
+ model = "SpacemiT K3 CoM260 TQ";
+ compatible = "spacemit,k3-com260-tq", "spacemit,k3-com260", "spacemit,k3";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = ð1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&phy1 {
+ realtek,aldps-enable;
+ realtek,clkout-disable;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "keep";
+ };
+
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_YELLOW>;
+ default-state = "keep";
+ };
+ };
+};
--
2.56.0