[PATCH v7 00/10] dmaengine: arm-dma350: Add slave support and Sky1 integration

From: Jelly Jia

Date: Tue Nov 17 2026 - 04:44:30 EST


Hello,

This series adds scatter-gather and cyclic peripheral transfers to the
Arm DMA-350 driver and describes the CIX Sky1 clock/reset integration.
The companion AUDSS interrupt-path series builds on these changes.

The first five patches fix existing trigger, DMA mask, coherency,
IRQ/termination and queued-status handling. Patches 6 and 7 prepare
managed registration and command bookkeeping before patch 8 adds slave
and cyclic transfers. The final two patches describe and handle the
integration clock and optional reset. DTS enablement is kept separate.

Linked commands use a coherent DMA pool and descriptor-owned peripheral
resource mappings. Sky1 has no IOMMU on this path, but its RCSU windows
still require CPU-to-DMA address translation through the DMA API.

Changes since v6:
- Split existing fixes and memcpy/memset preparation out of the new
slave/cyclic support. (Frank.)
- Use named little-endian hardware command fields and fill the coherent
pool directly. Keep CPU-endian memcpy/memset command storage and MMIO
handling; decode peripheral fields only when loading their registers.
Derive SG lengths from saved command sizes without cmd_len[]. (Frank.)
- Remove the prep-time DMA write barrier; retain the final non-relaxed
channel-enable writel and normal descriptor publication locking.
Keep descriptor-owned peripheral address mappings and the distinction
between read-only interrupt flags and W1C status bits. (Frank.)
- Use scoped guards consistently without extending critical sections,
consistent device_config/device_caps names and managed DMA/OF
registration. (Frank.)
- Put the submitter's Signed-off-by after the retained Reviewed-by tags.
(Frank.)

Previous version:
https://lore.kernel.org/r/20261106013453.1134239-1-Jelly.Jia@xxxxxxxxxxx

Jelly Jia (10):
dmaengine: arm-dma350: Fix source trigger bit
dmaengine: arm-dma350: Check DMA mask setup errors
dmaengine: arm-dma350: Initialize channel coherency
dmaengine: arm-dma350: Serialize IRQ and termination state
dmaengine: arm-dma350: Report submitted descriptor status
dmaengine: arm-dma350: Use managed device registration
dmaengine: arm-dma350: Track descriptor byte lengths explicitly
dmaengine: arm-dma350: Add slave and cyclic transfer support
dt-bindings: dma: arm,dma-350: Describe the CIX Sky1 integration
dmaengine: arm-dma350: Support integration clocks and resets

.../devicetree/bindings/dma/arm,dma-350.yaml | 30 +-
drivers/dma/arm-dma350.c | 946 ++++++++++++++++--
2 files changed, 886 insertions(+), 90 deletions(-)


base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
--
2.54.0