Re: [PATCH v3 0/6] arm64: dts: qcom: talos-lyra-evk: Add display overlays for EVK board
From: Krzysztof Kozlowski
Date: Tue Nov 17 2026 - 05:58:10 EST
On 02/11/2026 08:31, anand.tiwari@xxxxxxxxxxxxxxxx wrote:
> Qualcomm Talos Lyra EVK SoC card are mounted on the Lyra carrier card.
> The DSI0 interface from SoC card is routed to either the 22-pin DSI
> connector on carrier card named as JDISP1 DSI0 or to the DSI0_B2B
> connector, through a MUX which can be selected by a hardware DIP
> switch. There are multiple daughter cards designed that can be
> connected to this B2B connector.
>
> The below B2B display interfaces are enabled by default in base DTB:
> - DSI-to-HDMI using the LT9611UXD daughter card
>
> Below overlay DTs are added for additional display configurations:
> - talos-lyra-evk-dlc0697: DLC0697 DSI panel for Lyra with DLC
> daughter card
> - talos-lyra-evk-raspberrypi-dsi-7inch: Raspberry Pi 7-inch DSI
> panel with touch via the 22-pin DSI connector for Lyra
> - talos-lyra-evk-waveshare-dsi-8inch: Waveshare 8-inch DSI panel
> with touch via the 22-pin DSI connector for Lyra
> - talos-lyra-evk-lvds-auo,g133han01: AUO G133HAN01 LVDS panel for
> Lyra with LVDS daughter card
>
> These overlays are applied on top of the corresponding base board
> DTBs.
> Link: https://lore.kernel.org/all/20261027-talos-lyra-evk-v2-v3-0-658fd5a7ec99@xxxxxxxxxxxxxxxx/
>
> Dependencies:
> https://lore.kernel.org/r/20261012-talos-lyra-evk-v2-v2-0-dcc9316ebb59@xxxxxxxxxxxxxxxx
> https://lore.kernel.org/all/20261030-lyra-display-upstream-post-v2-0-906302159392@xxxxxxxxxxxxxxxx/
> https://lore.kernel.org/all/20261016-talos-gp-clk-freqs-update-v1-1-17c9a095063c@xxxxxxxxxxxxxxxx/
How can you have three dependencies for DTS? Some of these are event
drivers. DTS CANNOT depend on drivers, this is just unmanageable.
Best regards,
Krzysztof